USB Music Interface and Microphone for the Mac
Single channel input using one of the following three options:
- • Internal condenser microphone
- • Balanced XLR microphone preamp input with +10 to 63 dB of gain
- • Unbalanced 1/4” high impedance instrument input, 0 to 45 dB of gain
Features/Specs
Software selectable 48V phantom power
Line-level, 1/8” stereo output for headphones or unbalanced powered monitors
A/D and D/A conversion @ 44.1/48kHz, 24-bit
Multi-function encoder knob for input gain control and output level control
4 encoder function LED indicators
3 segment LED input and output metering
Apogee’s Maestro software for advanced control and low latency mixing
Compatible with any Core Audio compliant audio application
Dimensions: 2.25" W x 4.75" L x 1" H
For More Info http://www.apogeedigital.com/products/one.php
Configuration 12" 2-way multipurpose powered loudspeaker
Transducers
Low Frequency
High Frequency
12" neodymium transducer with 3" voice coil
1.4" diaphragm compression driver
Frequency Response (-3 dB) 1
Frequency Range (-10 dB) 1 62 Hz - 18 kHz
53 Hz - 22 kHz
Nominal coverage (-6 dB) 75° conical
Maximum SPL (1 meter) 131 dB peak
Amplifier
Power output 400W LF Class H
100W HF Class AB+B
Input impedance 22k balanced
11k unbalanced
Controls Gain
Low-cut filter (Main / Monitor)
Front LED On/Off
Power
Circuit breaker
Indicators Power
Signal
Limit
Cooling Convection
Amplifier protection Thermal and output power limiting
Output short circuit
Overtemperature muting
Driver DC protection
Current consumption at 120 VAC
(1/8 power EIA noise) 1.5A
Enclosure Painted Birch plywood
Finish Black textured paint
Grille Powder coated 16 gauge steel
Suspension/Attachment Points 9 M10 rigging locations
Connectors Balanced female XLR line level input
Balanced male XLR full range line level out
Dimensions 26.9 " H x 14.7 " W x 14.9 " D
(683 mm x 373 mm x 379 mm)
Net weight 60 lbs / 27.2 kgConfiguration 12" 2-way multipurpose powered loudspeaker
