Crown Audio XLS402D 300W Power Amplifier

Special Price $299.00 Regular Price $498.00
 
not_available
   

SKU
CROWN-XLS402D
eliable design incorporates many popular features Housed in a rugged, all-steel 2U chassis (3U in the XLS 5000) Efficient forced-air fans prevent excessive thermal buildup Electronically balanced XLR inputs; touchproof binding post and Speakon® outputs
Crown's XLS Series amplifiers define the standard for portable PA systems with unmatched performance, technology and affordability. Its advantageous flexibility includes multiple inputs so you can plug in anything and play anywhere, along with several system setup configurations. Stereo, 2 ohms (per ch.)-- Stereo, 4 ohms (per ch.) 450W Stereo, 8 ohms (per ch.) 300W Bridge-Mono, 8 ohms 900W Bridge-Mono, 4 ohms --
More Information
SKU CROWN-XLS402D
Freeshipping Free Shipping
MPN (manufacturer part number) XLS402D
Condition New
Features eliable design incorporates many popular features Housed in a rugged, all-steel 2U chassis (3U in the XLS 5000) Efficient forced-air fans prevent excessive thermal buildup Electronically balanced XLR inputs; touchproof binding post and Speakon® outputs Precision detented level controls, power switch, power LED, and six LEDs which indicate signal, clip and fault for each channel. Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications
Specs Stereo, 2 ohms (per ch.)-- Stereo, 4 ohms (per ch.) 450W Stereo, 8 ohms (per ch.) 300W Bridge-Mono, 8 ohms 900W Bridge-Mono, 4 ohms -- Sensitivity (volts RMS) for full rated power at 4 ohms 1.25 Frequency Response (at 1 watt, 22 Hz - 20 kHz) +0 dB, –1 dB Signal to Noise Ratio below rated power (20 Hz to 20 kHz, inputs terminated) A-weighted, below rated power No weighting, below rated power > 100 dB > 95 dB Total Harmonic Distortion (THD) at 1 full bandwidth power, from 20 Hz to 1 kHz < 0.5% Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from full rated output to –30 dB < 0.3% Damping Factor (8 ohm): 10 Hz to 400 Hz > 200 Crosstalk (below rated power) at 1 kHz at 20 kHz –75 dB –50 dB Input Impedance (nominal) (balanced, unbalanced) 20 kilohms, 10 kilohms Load impedance Stereo Bridge mono 4-8 ohms 8 ohms AC Line Voltage and Frequency Configurations Available (± 10%) 120 VAC 60 Hz 100 VAC 50/60 Hz 220 VAC 50 Hz 230-240 VAC 50 Hz Ventilation Flow-through ventilation from front to back Cooling Internal heat sinks with forced-air cooling Air Volume Requirements (per minute per unit) 80.15 ft3 (2.27 m3) Sensitivity (volts RMS) for full rated power at 4 ohms 1.25 Frequency Response (at 1 watt, 22 Hz - 20 kHz) +0 dB, –1 dB Signal to Noise Ratio below rated power (20 Hz to 20 kHz, inputs terminated) A-weighted, below rated power No weighting, below rated power > 100 dB > 95 dB Total Harmonic Distortion (THD) at 1 full bandwidth power, from 20 Hz to 1 kHz < 0.5% Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from full rated output to –30 dB < 0.3% Damping Factor (8 ohm): 10 Hz to 400 Hz > 200 Crosstalk (below rated power) at 1 kHz at 20 kHz –75 dB –50 dB Input Impedance (nominal) (balanced,unbalanced) 20 kilohms, 10 kilohms Load impedance Stereo Bridge mono 4-8 ohms 8 ohms AC Line Voltage and Frequency Configurations Available (± 10%) 120 VAC 60 Hz 100 VAC 50/60 Hz 220 VAC 50 Hz 230-240 VAC 50 Hz Ventilation Flow-through ventilation from front to back Cooling Internal heat sinks with forced-air cooling Air Volume Requirements (per minute per unit) 80.15 ft3 (2.27 m3) Dimensions: Width, Height, Depth Standard 19"W (EIA RS-310-B) x 3.5” (8.9 cm) H x15.2" (38.6cm) D. Net Weight, Shipping Weight 26LBS
© 2008 - 2017 RK Audio • 188 Lauman Lane Hicksville NY 11801 • 516-597-5450 All Rights Reserved.