Ashly mXa-1502 - 12x4 Digital Processor Amplifier

SKU
ASHLY-MXA-1502
Special Price $2,199.00 Regular Price $2,749.00
Account manager

Have a Question? Ask an Account Manager

Ashly MXA-1502 Mixer/Amplifier 12-In x 4-Out DSP Networkable 2 x 150W @ 2/4/8 Ohms or 25V/70V MXA-1502

The mXa-1502 with Ashly AquaControl™ software gives your customers multi-zone music distribution, paging, sound-masking and automatic mixing for a wide-range of environments. Process 12 audio inputs into four different areas with a single rack space device that includes two Ashly-reliable 150-watt amplifiers capable of driving 2,4 and 8-ohm as well as 25, 70 and 100V loads.

The mXa-1502 with AquaControl™ provides total control over four separate zones with a rich compliment of digital signal processing, including routing, automixing, ducking, amplifier monitoring, event scheduling/triggering and more. All through our easy-to-use AquaControl™ that doesn't require a week of tutorials to understand and configure. It lets you and your customers navigate using virtually any browser-enabled device. Trouble-shoot or re-configure it without having to travel to the client location. Or add our hard-wired WR-1.1 single-gang remote.

Features:

  • 8-balanced Mic/Line Inputs
  • Precision Class A mic preamp design
  • 4 Stereo Line Inputs
  • 4 Outputs
  • 2 x 150W Class D Amplifiers with selectable Multi-mode operation (2/4/8 Ohm + 25/70/100V)
  • Four convenient front-panel buttons for source/preset select
  • Scheduler and RTC (Real-Time Clock) allows user-defined automatic, timed activation of various operations
  • Generous integration I/O, including: Network, Serial, GPIO, VC, Standby & Fault (works with new WR-1.1 remote)
  • Compact 1U design reduces rack space requirements
  • New, advanced Ashly AquaControl™ software allows easy and convenient access from many browser-based devices. No app to install! Comprehensive DSP includes:
  • Inputs
  • Programmable Analog Mic Preamps Phantom Power On/Off Gain with Link Group Assign and Polarity switch Remote Gain DVCA Gain Meter with Peak Hold Equalizers 31-band Graphic - Constant or Proportional Q 10-band Parametric EQ + HPF / LPF Signal Generator Delay

Specifications:

  • Damping Factor: >250 (8 Ohm load <1kHz)
  • Distortion (SMPTE, typical): <0.5%
  • Distortion (THD-N, typical): <0.5% (8 Ohms, 10dB below rated power, 20Hz-20kHz)
  • Channel Separation: -75dB (dB from full output, 1kHz)
  • Signal-to-Noise (unweighted): 20Hz-20kHz, Gain@26dB
  • Frequency Response: 20Hz-20kHz, ±0.05dB
  • Balanced Input Connector: Euroblock 3.5mm
  • Input Impedance: 10k Ohms
  • Maximum Input Level: +21dBu
  • Speaker Output Connector: Euroblock 7.62mm
  • Nominal Voltage Input: 100 - 240VAC
  • Operating Range: 70 - 270VAC
  • Power Supply Type: SMPS with active PFC
  • AC Mains Line Cord Connector: Detachable Nema 5-15 for USA
  • Control Network: RJ-45 connector, 1GB Ethernet
  • AUX Output Connector: Balanced Euroblock 3.5mm
  • AUX Output Maximum Level: +21dBu
  • Data Connection: Euroblock 3.5mm - Gnd, +18V, Data Out, Data In
  • Fault Condition Logic Outputs: Euroblock 3.5mm - fault indicated by loss of 1Hz "heartbeat" pulse signal
  • Remote DC Level Control: Euroblock 3.5mm - Gnd, CV, V+ per input
  • Amplifier Protection: Shorted output power limiting, over-temperature, DC-output, power-supply fault, mains-fuses & inrush-current limiting
  • Cooling: Continuously variable temperature controlled fan
  • Unit Dimensions: 19"W x 1.75"H x 14.54"D (483mm x 5mm x 369mm)
  • Dimensions: 25.2"W x 2.5"H x 19.5"D / 641mm x 64mm x 495mm
  • Weight: 13.0 lbs (5.4 kg)
More Information
ConditionNew
MPN (manufacturer part number)MXA-1502
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account