Community R.35COAX- 10" 2-way High Broadband Output Loudspeaker

The compact R.15 and R.35 models give systems designers increased flexibility by offering vastly improved music playback, additional coverage patterns and higher output in attractive paintable enclosures. The R.15COAX and R.35COAX use identical 1.25-inch exit HF compression drivers, featuring Community’s exclusive Tru-Phase™ phase plug and Carbon Ring Cone Technology™. Both models include front-loaded LF drivers in highly reinforced enclosures for natural, non-resonant low frequency reproduction, while identical voicing ensures a uniform listening experience.

FEATURES
• Excellent musicality and intelligibility, and low distortion in an extremely compact enclosure
• Weather-resistant, compact, matte finish paintable high impact ABS plastic modified-trapezoidal
enclosure
• Hydrophobically-treated grille and LF driver cone, polymer HF diaphragm, and moisture-sealed
crossover
• 200W Autoformer (standard), selectable 8 ohm or 70V/100V operation
• Corrosion-resistant dual-layer powder-coated low-profile steel yoke and aluminum grille

TECHNICAL SPECIFICATIONS1
Operating Mode Passive, Selectable Low Impedance or 70V/100V
Operating Environment Indoor or Weather-Resistant Outdoor
Operating Range2 70 Hz to 16 kHz
Nominal Beamwidth (H x V) 90° x 90°
Transducers
LF 1 x 10" (254mm) Carbon ring cone with
hydrophobic treatment, 2" (51mm) Voice Coil
HF 1 x 1.25" (32mm) exit compression
Continuous Power Handling3
@ Nominal Impedance Passive 40V 200W @ 8 Ohms (800W peak)
Autoformer Taps 70V: 200W,100W, 50W, 25W
100V: 200W,100W, 50W
MUSIC VOICE
Nominal Sensitivity4
Passive
@ 1W
97 dB
@ 2.83V
97 dB
@ 1W
99 dB
@ 2.83V
99 dB
Nominal Maximum SPL5
(Whole Space) Passive
Peak
126 dB
Continuous
120 dB
Peak
128 dB
Continuous
122 dB
Equalized Sensitivity6       System @ 1W
97 dB
@ 2.83V
97 dB
Equalized Maximum SPL7 System Peak
126 dB
Continuous
120 dB
Required Accessories High Pass Filter - 70 Hz, 24 dB /octave, Digital Signal Processor
Recommended Amplifiers Passive 200W - 400W @ 8 Ohms, (40V - 57V)
PHYSICAL
Input Connection NL4 Speakon-type connector (low impedance only), and 7-position
terminal strip for low impedance or constant voltage operation
Controls Music / Voice switch, 70V/100V operation jumper
Mounting Points Two (2) M8 rigging points
Included Accessories Zinc-rich epoxy dual-layer powder-coated yoke, included
integral safety cable mounting point
Environmental
IP55W per IEC 529, designed to MIL-STD-810G
Color-matched ABS plastic input panel weather cover
with 13.5mm ID gland nut installed in .82" knockout
Dimensions H x W x D 11.00" x 13.00" x 13.50" (279 x 330 x 343 mm)
Weight 26 lbs (11.8 kg) with included yoke
Finish Refer to the Technical Drawing (page 3)