Special Price $999.00 Regular Price $1,199.99
7.1 Balanced Line Level XLR Outputs (+4dB/-10dB - switchable) Balanced XLR Auxiliary Audio Input (+4dB/-10dB - switchable) HDMI Video Switching (ver. 1.1) (2 sources) 192kHz/24 bit Crystal® DAC for all 8 Channels 32 bit Digital Surround Processing Chipsets Set-up menu via Video Outputs (Composite, S-Video, Component) Video Convert Feature (Composite/S-Video to Component)
Denon DN-A7100 - Professional A/V Surround Preamplifier At the top of the DN-A7100 feature list is its 8 true balanced line-level outputs. In many professional applications, the main feature utilized in any AV switching product is its ability to decode digital surround sound signals and output them to their specific speaker output. The DN-A7100 is no exception. It is compatible the with most advanced surround sound formats and because of its unique design, the DN-A7100 is ideal for any installation that requires high-quality, channel separated audio outputs — especially those installations where adapting unbalanced RCA preamp outputs is completely unacceptable (and it always is!) or the extra weight of ill-purposed, unused consumer power amps is not needed. Many installations now require surround sound decoding. From big deployments with many power amps driving line array speaker systems to small boardrooms and home theaters with active monitor systems, the Denon DN-A7100 is the affordable, professional choice.
|UPC (Universal Product Code)||No|
|MPN (manufacturer part number)||DNA7100|
|Features||Balanced XLR Auxiliary Inputs In addition to the DN-A7100’s 8 balanced line outputs, it’s thoughtfully equipped with a pair of stereo XLR inputs. Switchable between +4dB and -10dB input levels, these inputs are ideal for any source such as a professional CD player in a boardroom or an outboard microphone mixer in a conference hall. Full-featured AV Source Switching The DN-A7100 is not just a surround sound decoding preamp. It is a full-featured AV source switcher. All audio and video sources in an installation are easily hooked up to the rear of the unit and from the front panel, the included IR controller, or by RS-232, the end-user may easily select whichever source they wish to enjoy. Source Video Switching with Convert to Component Let’s face it. Even in today’s technically advanced systems, not all video components have high definition outputs. Many boardrooms still rely on source products like VCR’s and analog TV tuners. There is nothing worse than having to run multiple video cables to a display. Well, that’s OK. With the DN-A7100’s convert to component feature, it does not matter which input your device hooks up to. Simply plug your TV tuner into the composite TV input and your S-VHS into the VCR S-video input, the DN-A7100 converts the signals to the component outputs, allowing you to only run one set of cables to the display. 7.1 direct audio inputs Ensuring compatibility with any future component, audio format, or external equipment with decoded outputs (i.e. SACD, Blu-ray player, HD-DVD player) is not a problem with the inclusion of the 7.1 direct audio inputs. Controllability The DN-A7100 is controllable via it’s included Infrared remote controller or by RS-232c serial control. A 9-pin D-Sub connector allows for integration into any installation with a Crestron® or AMX® control system. AM/FM Tuner with XM Compatibility|
|Specs||FM Tuner Section Frequency Range 87.5 – 108.0 MHz Usable Sensitivity IHF 1.8 µV/16.4 dBf Signal to Noise Ratio Mono/Stereo 75/70 dB Distortion Mono/Stereo 0.2/0.3 % Stereo Separation 1 kHz 45 dB Alternate Channel Selectivity ± 300 kHz 60 dB Image Rejection 98 MHz 70 dB Tuner Output Level 1 kHz, ± 75 kHz Dev 800 mV AM Tuner Section Frequency Range 520 – 1710 kHz Signal to Noise Ratio 50 dB Usable Sensitivity Loop 400mV/m Distortion 400Hz, 30 % Mod. 0.5 % Selectivity ± 20 kHz 70 dB Audio Section Input Sensitivity/Impedance (volume at 0dB) (RCA connectors) 220 mV/ 20 kohms (XLR connectors) (+4dBu) 440 mV/ 20 kohms (–10dBV) 110 mV/ 20 kohms Output Level (volume at 0dB) (+4dBu) 300 mVrms typ. (–10dBV) 75 mVrms typ. Signal to Noise Ratio (Analog Input / Pure Direct) 98 dB Frequency Response (Analog Input / Pure Direct) 10 Hz – 90 kHz (± 3 dB) THD 0.03 % Cross Talk 80 dB (at 1 kHz) Audio Inputs 8 Sets Analog Inputs TV, DVD, VCR, DSS/VCR2, CD, TAPE, CDR/MD, Aux 2 (part of 7.1 dir. in) 1 Set Analog Balanced Input Aux 1 (XLR L/R - switchable +4dB/-10dB) 1 Set Discrete Analog Input Aux 2 (7.1 direct in) L/R (st.), SL, SR, C, SBL, SBR, SW 3 Digital Inputs Optical x 3 (assignable) Coaxial x 2 (assignable) Audio Outputs 8 Balanced Analog Outputs L, R, C, SL, SR, SBL, SBR, SW (XLR, switchable +4dB/-10dB) 1 Unbalanced Audio Output SW 3 Sets Analog REC Output VCR, TAPE, CDR/MD 2 Digital Outputs Optical x 1 Coaxial x 1 1 Headphone Output 1 - 1/4” HP Out (front panel mounted) Video Television Format NTSC Input Level/Impedance 1 Vp-p/75 ohms Output Level/Impedance 1 Vp-p/75 ohms Video Frequency Response 5 Hz to 8 MHz (– 1 dB) Video Frequency (Component) 5 Hz to 80 MHz (– 1 dB) S/N 60 dB Video Inputs 2 Sets HDMI (v1.1) Input Input-1, Input-2 (assignable) 3 Sets Component Video Input Input-1, Input-2, Input-3 (assignable) 5 Sets S-Video Input TV, DVD, VCR, VCR2, AUX1 5 Sets Composite Input TV, DVD, VCR, VCR2, AUX1 Video Outputs 1 Set HDMI (v1.1) Output Output 2 Sets Component Video Output Monitor Out-1, Monitor Out-2 2 Sets S-Video Output VCR, Monitor (will convert to Component) 2 Sets Composite Output VCR, Monitor (will convert to Component) Control RS-232 1 - DB9 Bi-Directional connector Infrared 1 - IR receiver (front panel mounted) Other Connectors FM Antenna In Coax (75 ohm) AM Antenna In Available XM Available DC Trigger 1/8” AC Inlet IEC Weighted Grounded with Detachable Cord General Power Requirement AC 120 V 60Hz Power Consumption 34 W Dimensions 19 in. (482.6mm) Width 13 7/8 in. (353.85mm) Depth 5 1/4 in. (132.6mm) 3U Height Weight 16.85 lbs (7.66 Kg)|