Dynaudio Acoustics BM 9S 10" Active subwoofer
Special Price $999.00 Regular Price $1,245.00
10” woofer Phase adjustment in 0° / 180° Auto on/off, power LED Mode selection, LFE or slave Adjustment of low-pass corner frequencies (50-150Hz)
Dynaudio Acoustics BM 9S 10" Active subwoofer The BM 9S subwoofer is intended to operate with the BM series monitors, more specifically, the BM 5A monitor. It is extremely well-suited for that extra punch to the bottom in setups where space is limited. The BM 9S delivers a clear, crispy and surprisingly powerful punch when you take its almost diminutive size into account. The BM 9S will complement stereo and multichannel monitoring equally well and when daisy-chaining of subwoofers is needed, it sports a low level LFE input/output. For significant control and enhancement of the general performance, the BM 9S is a closed cabinet type. This creates an internal pressure by which the woofer gains a considerable amount of precision when it comes to the reproduction of low frequent signals. This precision is easily audible and it augments the feeling of reality that the listener experiences.
|MPN (manufacturer part number)||BM9S|
|Features||The BM 9S is designed according to the strict BM series specifications. With a 10” woofer and 200 Watts of power, and virtually minute dimensions, this sub is tailor-made to take care of even the most comprehensive challenges where space is scarce. Being every bit as versatile as the rest of the BM series, BM 9S is a very competent partner for smaller stereo and multichannel setups, giving a very powerful system for even the most demanding users across the globe. The Auto On/Off function, provides a minimized idle energy usage by shutting off after minutes of no input signal. The auto sensing circuit enables BM9S to automatically come to life when input signal is detected. The satellite filters that this sub sports, provides high-pass filtering of the monitor source signal allowing 60Hz or 80Hz corner frequencies. This is a huge advantage for the monitor performance, as the satellites do not need to deal with power consuming lower frequencies. This leaves all the satellite power to greatly accelerate performance and precision. Main Features: 10” woofer Phase adjustment in 0° / 180° Auto on/off, power LED Mode selection, LFE or slave Adjustment of low-pass corner frequencies (50-150Hz) SAT/SUB high-pass adjustment, Flat, 60 Hz, 80 Hz Small dimensions: 11.6” X 11.4” X 12.5” 200 W @ 4 Ohms Discrete LFE input, slave output for linking Closed cabinet for extremely precise low frequency reproduction|
|Specs||System Active Subwoofer Frequency Response (+/- 3 dB) 29 Hz - 250 Hz Low Frequency Limit* 29 Hz High Frequency Limit* 50 Hz - 250 Hz Amplifier Power 200 W @ 4 Ohm Crossover Frequencies HP Sat: Flat / 60 Hz / 80 Hz Low Pass Filter 50 – 150 Hz Crossover Slope 2nd order Butterworth Crossover Bypass Yes (Flat) Phase adjustment 0° / 180° Inputs Balanced/XLR Input Sensitivity for Full Output* 75mV - 5V Maximum Input 10Vrms Input Impedance 20 k (+ branch) 10k (- branch) Output Balanced/XLR Master / Slave Link Yes Drive Unit 10" (24 cm), long throw Magnetic Shielding Yes Internal Cabinet Volume 15,9 litres Bass Principle Closed Power Consumption Max. 325 W Power Consumption Standby 16 W Mains Voltage** 100-120V 50/60Hz or 220-240V 50/60Hz Weight (net) 10 kg / 22 lbs Dimensions (W x H x D) 294 x 289 x 318 mm / 11.6" x 11.4" x 12.5"|