15 Amp Rating 9 Total Outlets "Protection OK" Indicator Wall Wart Spacing Indicator Front Panel Pull-out Lights
Furman M-8Lx 15A Power Conditioner With Lights A Merit Series Power Conditioner is the perfect low-cost AC power solution for any rack mount system. Install an M-8Lx into the top slot of your rack, and the eight switched outlets in the rear panel will power up and protect all your equipment up to a 15-amp load. The M-8Lx features two slide out, swiveling light fixtures to provide discreet illumination of your equipment on stages, in studios, and in other dark places. A dimmer knob lets you adjust the lamp brightness to just the right level.
|UPC (Universal Product Code)||00654061027942|
|MPN (manufacturer part number)||M-8LX|
Noise Filtration AC noise filtering to reduce radio frequency and electromagnetic interference (RFI/EMI) Surge Protection Spike & surge protection ensures equipment stays safe and your power stays clean 9 Total Outlets 8 rear panel outlets and 1 front panel convenience outlet 15 Amp Rating 15 amp rating, with circuit breaker "Protection OK" Indicator Front panel indicator LED lets you know that your equipment is being protected Wall Wart Spacing Indicator Rear outlets have been spaced to accomodate even the bulkiest of wall warts and adapters Front Panel Pull-out Lights Two retractable incandescent light fixtures with dimmer control for convenient rack illumination
Maximum Output Current: 15 amps Line Cord: 6 ft., captive, 14 AWG, with 3-conductor Edison plug Lamps: Two 120V incandescent bulbs, 4 watts each Operating Voltage: 120VAC 60Hz Spike Protection Mode: Line to neutral Energy Dissipation: 170 joules Peak Impulse Current: 12,000 amps Maximum Continuous Opterating Voltage: 130 VAC RMS Let Through Voltage (@ 125 amps, 8/20uS waveform) 400 volts Noise Attenuation: Transverse mode: Greater than 26dB, 200Khz to 10 Mhz Dimensions: 1.75” H x 19” W x 7.5” D Weight: 5.5 lbs. Safety Agency Listing: cTUVus Warranty: Merit Series units are protected by a limited three year warranty covering defects in materials and workmanship.