JBL VRX918SP 18" High Power Powered Flying Subwoofer

JBL VRX918SP 18" High Power Powered Flying Subwoofer

Do you need a super power subwoofer? JBL has it!

The JBL Pro VRX918SP 18" High Power Powered Flying Subwoofer has a built-in JBL Drivepack^® DPC-2 amplifier module designed by Crown that provides 1500 watts of peak power. The DSP based resident input module provides system optimization, EQ and crossover functionality. 

Specifically designed for use in arrays with VRX932LAP line array speaker and VRX-AF array frame, the VRX918SP is a suspendible subwoofer system that contains a 2268FF dual voice coil neodymium magnet, patented Differential Drive^® 18-inch woofer for high-power capacity in a front-loaded, vented enclosure. It may also be used in arrays consisting entirely of VRX918SP subwoofers.

In addition, the flying subwoofer has an integral rigging hardware for simple connection of enclosures and optional array frame, a 20mm threaded pole socket for solid, secure satellite speaker mounting, and a large port area for reduced distortion. It is also light weight at 38.5 kilograms (85 lb).

Moreover, the JBL Pro VRX918SP 18" has these unique specifications:

• Power Rating: 1500 Watts PeakLF: Dual-Bridged Technology™, Class D 
• Frequency Range: 31 Hz – 220 Hz
• Frequency Response: 34 Hz – 220 Hz
• Maximum Peak Output: 126 dB SPL at 1m 
• Bandpass Nominal Impedance: LF: 2 x 2 ohms 
• LF Driver: 1 x JBL 2268FF 457 mm (18 in) dual voice coil Differential Drive^® woofer with neodymium-magnet 
• Audio Input Connector: XLR with loop through 
• User Controls: Input Attenuator (0-16 dB)Selectable 80 Hz or 120 Hz Low Pass 80 Hz High-Pass enable/disable for XLR loop thru. 
• Signal Processing: DSP based, resident in Input Module 
• System Management: DSP based limiters for mechanical and thermal protection 
• AC Power Operating Range: 90-132 VAC or 216-264 VAC, 50/60Hz 
• AC Line Voltage: User selectable: 120V/240V (-15%, +10%) 
• AC Input Connector: Neutrik PowerCon (NAC 3MPA) 
• AC Loop Through Connector: Neutrik PowerCon (NAC 3MPB) 
• AC Current Requirements: 6A per system at 120V, 3A per system at 240V 
• Enclosure: 18 mm birch plywood. 
• Suspension / Mounting: Optional VRX-AF line-array frame kit or 10 mm forged eyebolts 
• Finish: Black DuraFlex™ finish 
• Grille: Powder coated, black, 16-gauge perforated steel with acoustically transparent foam 
• Dimensions (H x W x D): 508 mm x 597 mm x 749 mm (20.0 in x 23.5 in x 29.5 in). n