JBL PRX725 - Dual 15" 1500W 2-Way Powered Loudspeaker

Special Price $1,099.00 Regular Price $1,799.00



-1500W Powered PA Speaker -1.5" HF Driver -Floor, Stack, or Fly Mounting

JBL PRX725 - Dual 15" 1500W 2-Way Powered Loudspeaker 

The PRX725 is the next step in the highly successful PRX Series and introduces the first use of JBL’s patented Differential Drive® Technology with ferrite drivers. Differential Drive technology incorporates lower mass in the ferrite magnet for reduced weight while maximizing power amp efficiency for greater heat dissipation and increased power handling. Powering the PRX725 is a 1500 Watt high performance, exceptionally low distortion biamplification system engineered to deliver clean power with maximum headroom to efficiently deliver smooth high frequencies and rich, deep bass response even at very high sound power levels. Compact, ultra-lightweight, the PRX725 uses JBL’s tour tested technology throughout so you can trust it to deliver a lifetime of reliable performance.  

High Performance Drivers
37.5mm (1.5 in) Annular Polymer Diaphragm, Neodymium Magnet Compression Driver Resulting in Crystal Clear Highs and Sonic Accuracy. Wide coverage angles are achieved without compromise and harmonic distortion is minimized for maximum driver SPL without harshness.

Highly efficient Class-D amplification drives Maximum Sound Pressure Levels are the best indication of the performance of a powered speaker and all PRX700 Series excel in this critical specification. JBL’s ability to maximize the speaker and amplifier performance guarantees ample power, accurate dynamics and sonic purity.

Low Frequency
Tour tested Differential Drive technology delivers extended frequency response, high power output and low distortion in a dramatically lighter package. With the ferrite magnet positioned inside the dual-coil/dual-gap voice coil, heavy steel pole pieces are eliminated. The heat sink is the chassis itself, further lowering system weight while ensuring consistent, reliable performance.

Road Tough Construction
Built from a combination of 25 mm (on the top and bottom for added rigidity) and 18 mm, strong, light-weight poplar plywood made structurally sound with tongue and groove joints. JBL’s tour proven DuraFlex™ finish, grilles from dent-resistant 16 gauge steel, and light-weight glass-filled nylon handles ensure strength and durability. All M10 suspension points are constructed from 14 gauge steel and have been tested with a yield-strength of 1000 lbs. each. A seriously rugged package that will withstand the brutality of constant road use.

More Information
Freeshipping Free Shipping
UPC (Universal Product Code) 0 50036 90444 5
MPN (manufacturer part number) PRX725
Discount No
Condition New
Features -Two 15-inch woofers and a 1.5-inch neodymium compression driver -1500 watts of super-efficient Class-D power for maximum headroom -Built to take the rigors of the road with DuraFlex finish, 16 gauge steel grill and more -90 degree horizontal and 50 degree vertical coverage -Lightweight yet powerful -DSP Input limiter circuit, crossover, dynamic limiting, component optimization, selectable system EQ -XLR-1/4 inch combination mic/instrument inputs, RCA inputs, and XLR loop-through -Easy to use mixing via selection switches on both the input and loop-thru
Specification Detail
Powered Yes
Power Configuration Bi-amped (1500W Class D)
LF Driver Size 2 x 15"
LF Driver Power Amp 750W Class D
HF Driver Size 1.5"
HF Driver Power Amp 750W Class D
Frequency Range 46Hz-17kHz (±3 dB), boost engaged
Crossover Frequency 2.4kHz
Maximum Peak SPL 139dB
Horizontal Coverage Angle 90 Degrees
Vertical Coverage Angle 50 Degrees
Enclosure Material Poplar plywood
Mounting Options Floor, Stack, or Fly
Inputs 2 x Balanced XLR / 1/4", 2 x unbalanced RCA
Outputs 1 x XLR balanced
Height 42.14"
Width 17.52"
Depth 21.18"
Weight 82 lbs.
Manufacturer Part Number PRX725
Producut Video No

© 2008 - 2019 RK Audio • 188 Lauman Lane Hicksville NY 11801 • 516-597-5450 All Rights Reserved.