JBL PRX735 - 15" 1500W 3-Way Powered Loudspeaker

Special Price $1,099.00 Regular Price $1,799.00

 
not_available
   

SKU
JBL-PRX735

-1500W Powered PA Speaker -Horn-loaded 6.5" Midrange -Floor, Fly or Stack Mounting

JBL PRX735 - 15" 1500W 3-Way Powered Loudspeaker

The PRX735 is a self-powered, lightweight three-way loudspeaker system capable of delivering a very high level of performance over a broad bandwidth.

This speaker is ideally suited to applications where the program material exhibits subtlety and nuance. Perfectly capable of reproducing high fidelity full range sound without a subwoofer, when coupled with the extended low frequencies of the PRX718XLF, complete control over the entire audio spectrum is attained. As with all the full-range PRX700 Series systems, two EQ selections can be used to optimize the system for the program material and/or environment. The input section also accommodates either Line or Mic/Instrument level inputs.

The PRX735 is a self-powered, lightweight three-way loudspeaker system capable of delivering a very high level of performance over a wide bandwidth. The PRX735 is comprised of one 15 in 275G Differential Drive® woofer, a 165 mm (6.5 in) 196H horn-loaded mid-range and a 2408H-2 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver mounted to a 90° by 50° horn, all driven by a 1500 watt Audio Class-D power amplifier. Sophisticated DSP is at the core of a fully featured input section, providing user selectable system EQ, protection, input sensitivity selection, cross-over functionality, dynamic limiting and discrete component optimization.

All PRX700 cabinets are built from a combination of 25mm (on the top and bottom for added rigidity) and 18mm, strong, light-weight poplar plywood made structurally sound with tongue and groove joints. All PRX700 Series cabinets are protected by JBL’s tour proven DuraFlex™ finish. Grilles are made from dent-resistant 16 gauge steel and handles are made from light-weight glass-filled nylon for added strength and durability. All M10 suspension points are constructed from 14 gauge steel and have been tested with a yield-strength of 1000 lbs. each.

The amplifier input panel offers XLR or ¼ inch jack compatibility and a sensitivity switch provides extra flexibility, making it possible to connect literally any sound source without using a mixer. Signal present and overload lights indicate the system status and assist in setting the optimum level via the level control knob.

More Information
SKU JBL-PRX735
Freeshipping Free Shipping
UPC (Universal Product Code) 0 50036 90445 2
MPN (manufacturer part number) PRX735
Discount No
Condition New
Features -1500 watts of onboard Class D amplification -Tri-amplified with 500W to each driver -15" 275F Differential Drive woofer -6.5" horn-loaded midrange transducer -1.5" annular-polymer-diaphragm neodymium compression driver -90 x 50 degree HF horn -Sophisticated onboard DSP -XLR, TRS, and RCA jacks give you I/O flexibility -Poplar plywood construction for light weight and roadworthiness -Grilles are made from dent-resistant 16 gauge steel -Handles are made from lightweight glass-filled nylon for strength and durability -Weighs 77 pounds -Floor, stack, or fly mounting -Suspension points are constructed from 14 gauge steel
Specs
Specification Detail
Powered Yes
Power Configuration Tri-amped (1500W Class D)
LF Driver Size 15"
LF Driver Power Amp 500W Class D
HF Driver Size 1.5" (6.5" midrange driver)
HF Driver Power Amp 500W Class D (500W to midrange driver)
Frequency Range 39Hz-20kHz (±3 dB) with boost engaged
Crossover Frequency 480 Hz, 2.0kHz
Maximum Peak SPL 136dB
Horizontal Coverage Angle 90 Degrees
Vertical Coverage Angle 50 Degrees
Enclosure Material Poplar plywood
Mounting Options Floor, Stack, Fly
Inputs 2 x Balanced XLR / 1/4", 2 x unbalanced RCA
Outputs 1 x XLR balanced
Height 37.5"
Width 17.52"
Depth 21.18"
Weight 77 lbs.
Manufacturer Part Number PRX735
Producut Video No

© 2008 - 2018 RK Audio • 188 Lauman Lane Hicksville NY 11801 • 516-597-5450 All Rights Reserved.