
Shure SLX4 Single-Channel Diversity Receiver
Automatic Frequency Selection Automatic Transmitter Setup 960 Selectable frequencies across 24 MHz bandwidth Detachable 1/4 wave antennas Microprocessor-controlled diversity
MPN (manufacturer part number) | SLX4 |
---|---|
UPC (Universal Product Code) | 0 42406121590 |
Condition | New |
Specs | Audio Output Level (ref. +/– 38 kHz deviation with 1 kHz tone) XLR connector (into 600 Ohm load): –13 dBV 1/4 inch connector (into 3000 Ohm load): –2 dBV Output Impedance XLR connector: 200 Ohms 1/4 inch connector: 1 kilohm XLR output Impedance balanced Pin 1: Ground (cable shield) Pin 2: Audio Pin 3: No Audio Sensitivity -105 dBm for 12 dB SINAD, typical Image Rejection >70 dB, typical Power Requirements 12 to 18 Vdc at 150 mA, supplied by external power supply Dimensions 42 mm H x 197 mm W x 134 mm D (1.65 x 7.76 x 5.28 in.) Weight 816 g (1 lb. 13 oz.) Housing Galvanized steel |
- Shure SLX4 Single-Channel Diversity ReceiverSpecial Price $380.00 Regular Price $389.00
- JBL PRX412M 12" 300W 2-Way Passive LoudspeakerSpecial Price $529.00 Regular Price $624.00
- Allen & Heath Qu-16 - 16 Channel Rackmountable Digital MixerSpecial Price $1,699.00 Regular Price $2,999.00
- Shure BLX1288/PG30 - Dual Channel Combo Wireless SystemSpecial Price $549.00 Regular Price $686.00
- Shure SLXD14/85 - Wireless Lavalier SystemSpecial Price $749.00 Regular Price $936.00
- Total price
Shure SLX4 Single-Channel Diversity Receiver The SLX4 receiver brings unprecedented ease of use to wireless with Automatic Frequency Selection and Automatic Transmitter Setup. For use with SLX Wireless. With included rack hardware and detachable antennas, it is ready for immediate installation right out of the box. Model SLX4L is available with logic output for use with software echo cancellation and remote battery life
MPN (manufacturer part number) | SLX4 |
---|---|
UPC (Universal Product Code) | 0 42406121590 |
Condition | New |
Specs | Audio Output Level (ref. +/– 38 kHz deviation with 1 kHz tone) XLR connector (into 600 Ohm load): –13 dBV 1/4 inch connector (into 3000 Ohm load): –2 dBV Output Impedance XLR connector: 200 Ohms 1/4 inch connector: 1 kilohm XLR output Impedance balanced Pin 1: Ground (cable shield) Pin 2: Audio Pin 3: No Audio Sensitivity -105 dBm for 12 dB SINAD, typical Image Rejection >70 dB, typical Power Requirements 12 to 18 Vdc at 150 mA, supplied by external power supply Dimensions 42 mm H x 197 mm W x 134 mm D (1.65 x 7.76 x 5.28 in.) Weight 816 g (1 lb. 13 oz.) Housing Galvanized steel |