Free shipping
Free for all ground orders
Uniform cardioid pattern for superior off axis rejection Superior transient response from a low-mass large Mylar® diaphragm Flat, neutral frequency response for natural reproduction on stage or in the studio
MPN (manufacturer part number) | SM27-SC |
---|---|
UPC (Universal Product Code) | 00042406187213 |
Condition | New |
Specs | Type Condenser (externally biased) Frequency Response 20 to 20,000 Hz Polar Pattern Cardioid Impedance 150 Ohms (140 Ohms actual) Sensitivity(at 1 kHz, open circuit voltage) -37 dBV/Pa 1 Pascal=94 dB SPL Maximum SPL (1 kHz at 1% THD) 1000 Ohm load: 133 dB (147 dB, Pad on) 2500 Ohm load: 138 dB (152 dB, Pad on) Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz) 84.5 dB S/N ratio is difference between 94 dB SPL and equivalent SPL of self noise, A-weighted Dynamic Range (at 1 kHz) 1000 Ohm load: 123 dB 2500 Ohm load: 128 dB Common Mode Rejection (20 Hz to 20 kHz) > 50 dB Clipping Level (20Hz-20 kHz at 1% THD) 1000 Ohm load: 1 dBV 2500 Ohm load: 7 dBV THD of microphone preamplifier when applied input signal is equivalent to cartridge output at specified SPL Self Noise (typical, equivalent SPL, A-weighted) 9.5 dB Polarity Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3 Weight Net: 642 g (22.6 oz.) Switch Attenuator: -15 dB Low Frequency Response: flat; -6 dB/octave below 115 Hz; -18 dB/octave below 80 Hz Connector Three-pin professional audio (XLR), male Power Requirements 48 Vdc phantom, 5.4 mA |
Shure SM27 Multi-Purpose Condenser Microphone The SM27 is a rugged and versatile large-diaphragm, side-address cardioid condenser microphone. It has low self-noise and extended frequency response that picks up vocal and instrument nuances with clarity.Durable Shure construction features three separate mesh layers that reduce wind and breath noise. Equally comfortable on stage or in the studio.
MPN (manufacturer part number) | SM27-SC |
---|---|
UPC (Universal Product Code) | 00042406187213 |
Condition | New |
Specs | Type Condenser (externally biased) Frequency Response 20 to 20,000 Hz Polar Pattern Cardioid Impedance 150 Ohms (140 Ohms actual) Sensitivity(at 1 kHz, open circuit voltage) -37 dBV/Pa 1 Pascal=94 dB SPL Maximum SPL (1 kHz at 1% THD) 1000 Ohm load: 133 dB (147 dB, Pad on) 2500 Ohm load: 138 dB (152 dB, Pad on) Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz) 84.5 dB S/N ratio is difference between 94 dB SPL and equivalent SPL of self noise, A-weighted Dynamic Range (at 1 kHz) 1000 Ohm load: 123 dB 2500 Ohm load: 128 dB Common Mode Rejection (20 Hz to 20 kHz) > 50 dB Clipping Level (20Hz-20 kHz at 1% THD) 1000 Ohm load: 1 dBV 2500 Ohm load: 7 dBV THD of microphone preamplifier when applied input signal is equivalent to cartridge output at specified SPL Self Noise (typical, equivalent SPL, A-weighted) 9.5 dB Polarity Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3 Weight Net: 642 g (22.6 oz.) Switch Attenuator: -15 dB Low Frequency Response: flat; -6 dB/octave below 115 Hz; -18 dB/octave below 80 Hz Connector Three-pin professional audio (XLR), male Power Requirements 48 Vdc phantom, 5.4 mA |