PreSonus FireStudio Tube FireWire Recording
Special Price $699.95 Regular Price $849.95
16 input channels, including mic, line, and instrument inputs 6-segment, fast-acting, LED input and gain-reduction metering for SuperChannels
PreSonus FireStudio Tube FireWire Recording System With 2 Super Channels The FireStudio Tube is a world-class 24-bit/96k professional FireWire recording system loaded with the perfect combination of inputs and outputs for bands, producers, musicians and engineers to produce commercial-quality recordings. The FireStudio Tube is bundled with PreSonus Studio One Artist, our groundbreaking music creation program, and over 4 GB of virtual instruments, plug-ins, loops, and samples to get you started making music immediately. Two SuperChannels - Tube Preamplifiers with Limiter The front panel of the FireStudio Tube is loaded with two “SuperChannels” featuring class A vacuum tube microphone and instrument preamplifiers along with full-featured analog limiters. The tube preamplifiers use a high gain, military grade 12AX7 tube for maximum gain, low noise and high headroom. Neutrik combo connectors allow both XLR microphone input and hi-Z instrument input. Preamp controls include preamp gain and tube drive to achieve a wide range of sounds from smooth, clean and clear, to warm tube saturation. An 80Hz high pass filter is also located on the front panel to remove room rumble and unwanted lows.
|MPN (manufacturer part number)||FIRESTUDIOTUBE|
|Features||16 input channels, including mic, line, and instrument inputs 2 front-panel mic/instrument inputs into SuperChannels, each featuring a vacuum-tube preamplifier with trim control, 80 Hz high-pass filter, and analog compressor/limiter with VCA-based, dual-domain RMS and peak-detection 8 mic/line inputs, each with high-headroom Class A XMAX™ mic preamplifiers and trim controls 6 line inputs 48V phantom power for condenser microphones 6-segment, fast-acting, LED input and gain-reduction metering for SuperChannels Headphone jack with level control Power/Sync LED (indicates unit is synced to word clock) Daisy-chain with multiple FireStudio Tubes or other FireStudio-family products to create a large, custom system Studio One Artist™ digital audio workstation software included Input/Output 2 FireWire 400 ports 2 combo XLR/¼” mic/instrument inputs into SuperChannels 8 XLR mic/line inputs 6 balanced ¼” analog line inputs 2 balanced ¼” main (L/R) line outputs 4 additional balanced ¼” analog line outputs MIDI in/out ¼” headphone output Digitalia 24-bit resolution and up to 96 kHz sampling rate High-definition A/D/A converters (+114 dBu dynamic range) JetPLL™ Jitter Elimination Technology (improved stereo imaging and clarity) Zero-latency monitoring via 16x8 DSP matrix mixer/router Mac®- and Windows®-compatible, including Mac OS X 10.6 Snow Leopard and Windows 7 Supports ASIO, Core Audio, Direct Sound (Windows XP), Windows Audio Session API (Windows Vista and Windows 7) Physical 1U 19” rack-mountable, rugged steel chassis Sealed, detented, metal rotary controls Internal power supply with standard IEC power cord Software Studio One Artist PreSonus’ revolutionary new digital audio workstation, with unlimited track count and 4+ GB of 3rd-party resources. Universal Control control-panel application for Mac OS X and Windows|
|Specs||Computer system requirements: Below are the minimum computer-system requirements for your FireStudio Tube. Windows Windows 7, Vista, XP (32-bit and 64-bit) Intel Pentium 4 1.6 GHz processor or AMD Athlon 64 (Turion) (2.5 GHz or faster recommended) 1 GB RAM (2 GB or more recommended) Macintosh Mac OS X 10.5.2 or later (32-bit and 64-bit) PowerPC G4 1.25 GHz or Intel Core Solo 1.5 GHz processor (2 GHz or faster recommended) 1 GB RAM (2 GB or more recommended) Windows and Macintosh Systems IEEE 1394 FireWire 400 Port Internet connection recommended DVD-ROM drive Internal or external 7200 RPM storage drive highly recommended Microphone Preamp 1-8 (XLR Balanced) Type XLR Female Balanced Frequency Response (±0.5 dB) 20 Hz to 50 kHz Frequency Response (±3.0 dB) 20 Hz to 150 kHz Input Impedance (Balanced) 1600 Ohm THD+N (unwtd, 1kHz @ +4 dBu Output, Unity Gain < 0.0003% EIN (unwtd, 55dB Gain, 150 Ω Input, 20Hz to 22kHz -126 dBu S/N Ratio (Unity Gain, unwtd, Ref. = +4 dBu, 20Hz to 22 kHz > 101dB Common Mode Rejection Ratio (1 kHz, 55 dB Gain) > 55dB Gain Control Range (± 1dB) -4 dB to 50dB Maximum Input Level (Unity Gain, 1 kHz @ 0.5% THD+N) +14 dBu Phantom Power (±2 VDC) +48 VDC Instrument Input Type 1/4" TS Input Impedance 1 Mega Ohm Preamps 15 & 16 Gain Reduction -16 to +20 dB ThD+N (unwtd, 1KHz @ +4dBu Output, Unity Gain) <.2% Limiter 0 to -18dBu Gain Control (+/-1dB) +4dB to +58dB 80 Hz filter < 0.0003% Line Inputs 9-14 (1/4” TRS) Frequency Response (+0,- 0.5dB) 20Hz to 50kHz Frequency Response (+0/-3.0 dB) 20Hz to 150kHz Input Impedance (Balanced) 10 KOhm THD+N (unwtd, 1KHz @ +4dBu Output, Unity Gain) < 0.003% S/N Ratio (Unity Gain, unwtd, Ref. = +4dBu, 20Hz to 22KHz) >101dB Maximum Input Level (Unity Gain, 1KHz @ 0.5% THD+N) +20dBu Headphone Output Type TRS Active Stereo Maximum Output 150 mW/CH @ 60 Ohm Load Frequency Response (±1.0 dB) 10 Hz - 70kHz Digital Audio FireWire (IEEE 1394) Speed 400mbps ADC Dynamic Range (Awtd, 48 kHz Sample Rate) 114 dB DAC Dynamic Range (Awtd, 48 kHz Sample Rate) 114 dB Bit Depth 24 Reference Level for 0dBFS +10 dBu Internal Sample Frequency Selections (kHz) 44.1, 48, 88.2, 96 Jitter Specification <20ps RMS, 20Hz-20kHz Jitter Attenuation >60dB; 1ns in approx.1ps out Power Input Connector Type IEC Input Voltage (factory configured) 90 to 240 VAC Power Requirements (Continuous) 20W Physical Main Chassis Package Type 1U - steel chassis Dimensions 19(W) X 1.75(H) X 9.5(D) inches Weight 10.0lbs|