QSC PLX-1104 - 325W PLX2 Series Stereo Power Amplifier
Special Price $749.00 Regular Price $899.00
Value combined with uncompromised PLX technology, quality and performance for applications that don't require bridged or 2 ohm stereo operation. Two models with power ratings up to 900 watts per channel @ 4 ohms. Clip limiting protects speakers; thermal limiting maintains operation even during abnormal overloads.
The compact PLX1104 brings the same performance and technology as the rest of the PLX2 Series, plus even greater value, to applications that don't require bridged or 2 ohm operation. Designed to power one or two speakers from each amplifier channel (4 ohm minimum loading), this model offer a simplified feature set while retaining genuine, uncompromised PLX performance and technology. Weighing just 13 pounds (5.9 kg), the "plug-and-play" PLX1104 is perfect for ultra-portable rigs, as well as reference-quality playback.
|MPN (manufacturer part number)||PLX1104|
|Features||PLX2 Series Features All models Very light weight ("02" models, 21 lbs/9.5 kg, "04" models 13 lbs/5.9 kg). Cooling design exhausts hot air out the front, keeping the rack cool. Flow-through heat sinks require no filters that could become clogged. Front panel LED power, clip, -10 dB, and signal present indicators for system monitoring and troubleshooting. 02 models also feature bridge and parallel mode LED indicators. Speakon® NL-4 output connectors provide a positive-locking speaker connection. Ch 1 output uses all 4 wires for single-cable connection to bi-amplified speakers. 21-position front-panel gain controls for precise, repeatable amplifier adjustment. Balanced XLR inputs with parallel TRS connectors accommodate all common input connectors and support loop-through operation. Patented PowerLight power supply technology with other patents pending. 04 models Value combined with uncompromised PLX technology, quality and performance for applications that don't require bridged or 2 ohm stereo operation. Two models with power ratings up to 900 watts per channel @ 4 ohms. Clip limiting protects speakers; thermal limiting maintains operation even during abnormal overloads. 02 models Speakon® NL4 and binding post outputs. 100 Hz high pass and low pass filters for bi-amping subwoofer and satellite systems without the need for an external crossover. Switchable/defeatable 33 Hz infrasonic filters protect woofers from over-excursion damage. Switchable/defeatable clip limiters. Four models with power ratings up to 1800 watts per channel @ 2 ohms, 3600 watts bridged @ 4 ohms.|
|Specs||Stereo Mode 8 ohms (each channel) FTC 20 Hz - 20 kHz 0.05% THD EIA 1 kHz 0.1% THD 310 W 325 W Stereo Mode 4 ohms (each channel) FTC 20 Hz - 20 kHz 0.05% THD EIA 1 kHz 0.1% THD 500 W 550 W Frequency Response 20 Hz-20 kHz, -0.5 dB Damping Factor Greater than 200 Input Impedance 20k ohms balanced 10k ohms unbalanced Input Clipping 5.5 Vrms (+15 dBu) Cooling Variable-speed fan, rear-to-front air flow Input Connectors, each channel 3-pin XLR and 1/4" TRS balanced Output Connectors, each channel Neutrik® NL4 Speakon®(Both channels available on Ch 1 output) Rear Panel Switches Circuit Breaker Front Panel Controls Detented Gain Attenuator: 0 to ∞ dB Power On/Off Front Panel Indicators Clip: Red LED-10: Green LED Signal (-35 dB): Green LED Power: Blue LED Dimensions Height Width Depth, Rack mounting surface to rear panel Overall Depth 3.5" (8.9 cm) 2 rack spaces 19" (48.3 cm) 8.95" (22.7 cm) 11" (27.9 cm) Weight 13 lbs. (5.9 kg) net 18 lbs. (8.2 kg) shipping|