The PLX2 series is a range of premium quality, high-power amplifiers designed for the most demanding live performance uses. Built on the third generation of QSC PowerLight technology, PLX2 amplifiers combine light weight, superlative audio quality and proven QSC reliability. The PLX1802 is an excellent choice for users who need to drive up to four loudspeakers from each amplifier channel (2 ohm loading), or when extremely high power bridge mono operation is required. The PLX1802 features built-in subwoofer processing, filter switches, and front panel indications of bridge mono status.
|UPC (Universal Product Code)||0 684284050885|
|MPN (manufacturer part number)||PLX1802|
|Features||PLX2 Series Features All models Very light weight ("02" models, 21 lbs/9.5 kg, "04" models 13 lbs/5.9 kg). Cooling design exhausts hot air out the front, keeping the rack cool. Flow-through heat sinks require no filters that could become clogged. Front panel LED power, clip, -10 dB, and signal present indicators for system monitoring and troubleshooting. 02 models also feature bridge and parallel mode LED indicators. Speakon® NL-4 output connectors provide a positive-locking speaker connection. Ch 1 output uses all 4 wires for single-cable connection to bi-amplified speakers. 21-position front-panel gain controls for precise, repeatable amplifier adjustment. Balanced XLR inputs with parallel TRS connectors accommodate all common input connectors and support loop-through operation. Patented PowerLight power supply technology with other patents pending. 04 models Value combined with uncompromised PLX technology, quality and performance for applications that don't require bridged or 2 ohm stereo operation. Two models with power ratings up to 900 watts per channel @ 4 ohms. Clip limiting protects speakers; thermal limiting maintains operation even during abnormal overloads. 02 models Speakon® NL4 and binding post outputs. 100 Hz high pass and low pass filters for bi-amping subwoofer and satellite systems without the need for an external crossover. Switchable/defeatable 33 Hz infrasonic filters protect woofers from over-excursion damage. Switchable/defeatable clip limiters. Four models with power ratings up to 1800 watts per channel @ 2 ohms, 3600 watts bridged @ 4 ohms.|
|Specs||• STEREO MODE, both channels driven * 8 ohms FTC 20 Hz - 20 kHz 0.05% THD EIA 1 kHz 0.1% THD 320 W 330 W 4 ohms FTC 20 Hz - 20 kHz 0.05% THD EIA 1 kHz 0.1% THD 525 W 575 W 2 ohms EIA 1 kHz 1% THD 900 W • BRIDGE MONO MODE * 8 ohms 20 Hz-20 kHz 0.1% THD EIA 1 kHz 0.1% THD 1100 W 1200 W 4 ohms 1 kHz 1% THD 1800 W Signal to Noise (20 Hz - 20 kHz)-107 dB Input Sensitivity @ 8 ohms 1.28 Vrms Gain @ 8 ohms 32 dB Output Circuitry AB Distortion (SMPTE-IM) Less than 0.02% Frequency Response 20 Hz-20 kHz, -0.5 dB Input Connectors, each channel 3-pin XLR and 1/4" TRS balanced Output Connectors, each channel Neutrik® NL4 Speakon® and Touch-proof binding posts (Both channels available on Ch 1 NL4 connector) Input Connectors, each channel 3-pin XLR and 1/4" TRS balanced Output Connectors, each channel Neutrik® NL4 Speakon® and Touch-proof binding posts(Both channels available on Ch 1 NL4 connector) Front Panel Controls Detented Gain Attenuator: 0 to ∞ dB Power On/Off Dimension Height Width Depth, Rack mounting surface to rear panel Overall Depth 3.5" (8.9 cm) 2 rack spaces 19" (48.3 cm) 12.8" (32.6 cm) 14.875" (37.9 cm) Weight 21 lbs. (9.5 kg) net 26 lbs. (11.8 kg) shipping|