Special Price $949.00 Regular Price $1,329.00
The PLX2502 is an excellent choice for users who need to drive up to four loudspeakers from each amplifier channel (2 ohm loading), or when extremely high power bridge mono operation is required. The PLX2502 features built-in subwoofer processing, filter switches, and front panel indications of bridge mono status.
The PLX2 series is a range of premium quality, high-power amplifiers designed for the most demanding live performance uses. Built on the third generation of QSC PowerLight technology, PLX2 amplifiers combine light weight, superlative audio quality and proven QSC reliability. The PLX2502 is an excellent choice for users who need to drive up to four loudspeakers from each amplifier channel (2 ohm loading), or when extremely high power bridge mono operation is required. The PLX2502 features built-in subwoofer processing, filter switches, and front panel indications of bridge mono status.
|UPC (Universal Product Code)||0 684284050892|
|MPN (manufacturer part number)||PLX2502|
|Discount||INSTANT SAVINGS: 10% OFF|
|Features||PLX2 Series Features All models Very light weight ("02" models, 21 lbs/9.5 kg, "04" models 13 lbs/5.9 kg). Cooling design exhausts hot air out the front, keeping the rack cool. Flow-through heat sinks require no filters that could become clogged. Front panel LED power, clip, -10 dB, and signal present indicators for system monitoring and troubleshooting. 02 models also feature bridge and parallel mode LED indicators. Speakon® NL-4 output connectors provide a positive-locking speaker connection. Ch 1 output uses all 4 wires for single-cable connection to bi-amplified speakers. 21-position front-panel gain controls for precise, repeatable amplifier adjustment. Balanced XLR inputs with parallel TRS connectors accommodate all common input connectors and support loop-through operation. Patented PowerLight power supply technology with other patents pending.|
|Specs||STEREO MODE, both channels driven * 8 ohms FTC 20 Hz - 20 kHz 0.05% THD EIA 1 kHz 0.1% THD 425 W 450 W 4 ohms FTC 20 Hz - 20 kHz 0.05% THD EIA 1 kHz 0.1% THD 675 W 750 W 2 ohms EIA 1 kHz 1% THD 1250 W BRIDGE MONO MODE * 8 ohms 20 Hz-20 kHz 0.1% THD EIA 1 kHz 0.1% THD 1400 W 1500 W 4 ohms 1 kHz 1% THD 2500 W Signal to Noise (20 Hz - 20 kHz) -106 dB Input Sensitivity @ 8 ohms 1.15 Vrms Gain @ 8 ohms 34 dB Output Circuitry 2-Tier Class H Distortion (SMPTE-IM) Less than 0.02% Typical Distortion 1/8 rated power, 20 Hz-20 kHz Full rated power, 20 Hz-20 kHz Less than 0.02% Less than 0.02% Frequency Response 20 Hz-20 kHz, -0.5 dB Damping Factor Greater than 500 Input Impedance 20k ohms balanced 10k ohms unbalanced Input Clipping 11 Vrms (+21 dBu) Cooling Variable-speed fan, rear-to-front air flow Input Connectors, each channel 3-pin XLR and 1/4" TRS balanced Output Connectors, each channel Neutrik® NL4 Speakon® and Touch-proof binding posts (Both channels available on Ch 1 NL4 connector) Rear Panel Switches Input Configuration: Bridge/Stereo/Parallel Clip Limiters each channel Filters (per channel): Top 100 Hz HPF/Full/Sub 100 Hz LPF & 33 Hz HPF/Full (infrasonic) Front Panel Controls Detented Gain Attenuator: 0 to ∞ dB Power On/Off Front Panel Indicators Clip: Red LED -10: Green LED Signal (-35 dB): Green LED Power: Blue LED Parallel: Amber LED Bridge Mono: Amber LED PROTECTION Amplifier Protection Full short circuit, open circuit, thermal, infrasonic, ultrasonic, and RF protection Stable into reactive or mismatched loads Load Protection On/off muting, DC-fault power supply shutdown Infrasonic -3 dB, 5 Hz DC fault Power supply shutdown Ultrasonic -3 dB, 85 kHz Short Circuit Cutback Thermal Muting at 90° C Over Current Active clip limiting Power supply cutback High Line Standard +15%, survive +25% Low Line -33% PHYSICAL Dimensions Height Width Depth, Rack mounting surface to rear panel Overall Depth 3.5" (8.9 cm) 2 rack spaces 19" (48.3 cm) 12.8" (32.6 cm) 14.875" (37.9 cm) Weight 21 lbs. (9.5 kg) net 26 lbs. (11.8 kg) shipping Agency Approvals CE, FCC, cUL, UL * CE versions may have up to 12% (0.5 dBw) less power due to special construction to meet EN-61000 AC harmonic limits CURRENT CONSUMPTION PLX2502 1/8 Power (pink noise) 8 ohms 4 ohms 2 ohms 5A/120V 7.5A / 120V 11.2A / 120V 1/3 Power (pink noise) 8 ohms 4 ohms 2 ohms 8.2A/120V 12.6A / 120V 19A / 120V Full Power 8 ohms 4 ohms 2 ohms 15.5A/120V 25A / 120V 37A / 120V Notes Long term, active-limited to 30A/120V|