-High Quality 2-way passive loudspeaker
-2 x 5.5" woofer, vented
-1 x 1" in driver, on 90°x90° CD horn
-100W AES power handling
M 502 is a multipurpose two-way twin-woofer full-range speaker system, suitable in a wide range of installations.
The compactness, together with the elegant and neutral design with accurate finishing make M 502 suitable for almost any environment and architectural constraint.
Available mounting accessories allow you to use the M 502 wall or ceiling mounted, with reference to the several possible applications.
The M 502 has a controlled coverage through its twin 5" and the precise constant directivity horn. The SPL and the level of undistorted sound the M 502 can reach is far above any expectation from such a compact solution.
The M 502 features high sensitivity thanks to the use of oversized magnets and a comfortable sound quality with smooth and wide frequency response performed thanks to the Kapton diaphragm compression driver loaded with a constant directivity horn.
The LICC crossover design includes an electronic protection on high frequency device.
- High Quality 2-way passive loudspeaker
- 2 x 5.5" woofer, vented
- 1 x 1" in driver, on 90°x90° CD horn
- High Power Handling ‘Low Impedance Compensated Crossover', with electronic protection for the driver
- 100W AES power handling
- Steel Front Grille with robust double mesh polyester clothing
- Rotatable RCF front logo
- Installation points are available on the rear panel, top and bottom
- All models have a 4-pin EUROBLOCK connector (audio input and parallel link output)
- Frequency Response -10 dB:80 Hz ÷ 20000 Hz
- Max SPL @ 1m:116 dB
- Horizontal coverage angle:90°
- Vertical coverage angle:90°
- Directivity index; Q:9
- System Sensitivity:92 dB
- Nominal Impedance:8 Ω
- Power Handling:100 W
- Peak Power Handling:400 W
- Recommended Amplifier:200 W
- Crossover frequencies:2300 Hz
- Compression Driver:1" HFdriver, 1.5" voice coil
- Nominal Impedance:8 Ω
- Input Power Rating:25 W AES
- Sensitivity:106 dB
- Woofer:2 x 5.5" Woofer, 1.2" voice coil
- Nominal Impedance:16 Ω
- Input Power Rating:80 W AES
- Sensitivity:88 dB
- Input connector:4-pin EUROBLOCK
- Cabinet Material:MDF 12 mm
- Hardware:6 x M6, 2 x M10
- Grille:Steel, with a robust double mesh polyester clothing
- Height:470 / 18.50 mm/inch
- Width:175 / 6.88 mm/inch
- Depth:185 / 7.28 mm/inch
- Net Weight:7.5 / 16.5 kg/lbs
|UPC (Universal Product Code)||08024530007539|
|MPN (manufacturer part number)||M502|
|Discount||INSTANT SAVINGS: 10% OFF|