
DBX 286s Mic Pre-Amp Processor
-Single Channel -4 Processors -Compressor -De-Esser
MPN (manufacturer part number) | 286s |
---|---|
UPC (Universal Product Code) | 00691991401237 |
Condition | New |
Specs | MIC INPUT INPUT Floating balanced, Pin 2 HotImpedance: ~4.2kΩMaximum Level: 0.25Vrms, Gain = 30dBGain Adjustment Range: 0dB to +60dBPhantom Power: +48VDC, applied to XLR pins 2 and 3 through 6.81kΩ resistorsCMRR: >40dB, typically 55dBEIN: -125dBu, 22Hz-22kHz, 150Ω source impedance LINE INPUT Input: Floating balanced, TIP HotImpedance: 10kΩ unbalanced, 20kΩ balancedMaximum Level: >+21dBu, balanced or unbalancedGain Adjustment Range: -15dB to +45 dBCMRR: >40dB, typically 55dBINSERT (1/4" TRS phone) Normalled; tip is Send, ring is ReturnRing: Impedance: >5kΩMaximum Level: >+21dBuTip: Impedance: 100ΩMaximum Level: >+21dBu, >+20dBm (600Ω load)Noise: <-89dBu, unweighted (20Hz-20kHz); LINE GAIN Control set to 0dBDistortion: <0.01% THD, 20Hz-20kHz, +10dBuLINE OUTPUT 1/4" TRS phone: Balanced/UnbalancedImpedance: 100Ω unbalanced, 200Ω balancedMaximum Level: >+21dBu, >+20dBm (600Ω load)Gain Adjustment Range: -30dB to +10dBNoise: <-80dBu unweighted (20Hz-20kHz); Both Gain Controls set for 0dB, all processing controls OFFFrequency Response: 20Hz to 20kHz, +0.5/-0.5dBDistortion: <0.08%THD, 20Hz-20kHz, +10dBu, all Processing Controls OFFCOMPRESSOR Threshold Range: -40dBu to +20dBuThreshold Characteristics: OverEasy®Compression Ratio: >4:1 For input levels beyond 20dB above thresholdMaximum Compression: 30dBAttack Time: Program-Dependent; >1s for small level increases, down to 10ms for larage increasesRelease Time: Program-Dependen; adjustable between approximately 1dB/sec and 75dB/secDistortion: Typically <0.05%THD, 20Hz-20kHz, 15dB G/R, +10dBu Output, DENSITY @ 0SMPTE Intermodulation Distortion: <0.05%; 60Hz/7kHz 4:1, 15dB G/R, +10dBu Output Level, DENSITY @ 0DE-ESSER Characteristic: Wideband Gain ReductionFrequency Range: 800Hz to 10kHz High Pass, 12dB/octaveRelease Time: Program-Dependent approximately 1ms/dBENHANCER HF Detail Characteristic: Program-controlled shelving equalizer, approximately 15dB maximum HF boostLF Detail Characteristics: Bell-shaped boost @ 80Hz, bell-shaped cut @250Hz, ratio is approximately 2:1EXPANDER/GATE Threshold Range: OFF to +15dBuExpansion Ratio: Adjustable 1.5:1 to 10:1Maximum Depth: >50dBAttack Time: Program-Dependent, approximately 2mS (at maximum attenuation)Release Time: Program-Dependent, approxiamtely 10mS/dBDynamic Range: Typically 105dBPOWER Power Requirements: 15wattsOperating Voltage: DO: 120VAC 60Hz, 100VAC 50/60Hz; EU: 230VAC 50/60HzOperating Temperature: 0°C to 45°C (32°F to 113°F)PHYSICAL Dimensions: 1.75" x 5.75" x 19" (4.5cm x 14.6cm x 48.5cm)Weight: Net Weight: 4.5 lbs/2.04 Kgs Shipping Weight: 6.54 lbs/2.97 Kgs |
- DBX 286s Mic Pre-Amp ProcessorSpecial Price $229.00 Regular Price $286.25
- DBX 166XS Dual Compressor/Limiter/GateSpecial Price $249.00 Regular Price $339.95
- DBX 266XS Dual Compressor/GateSpecial Price $179.00 Regular Price $209.95
- DBX DriveRack PA2 - Complete Loudspeaker Management SystemSpecial Price $459.00 Regular Price $499.00
- DBX 1046 Quad Compressor LimiterSpecial Price $569.00 Regular Price $799.95
- Total price
DBX 286s Mic Pre-Amp Processor The dbx® 286s is a full featured Channel Strip Processor that delivers a studio quality microphone/instrument preamplifier and four processors that can be used independently or in any combination. Why mic up vocals and instruments through a noisy, blurry mixer? The sonically pristine dbx 286s Mic Preamp has all the features you need, including wide-ranging input gain control, switchable +48V phantom power, and an 80Hz high-pass filter to remove low frequency hum, rumble or wind. Use the patented dbx OverEasy® compressor to transparently smooth out uneven acoustic tracks or deliver that classic "in your face" vocal performance that only a dbx compressor can. Eliminate vocal sibilance and high frequency distortion from instruments such as cymbals with the frequency tunable De-Esser. Fine-tune the Enhancer HF Detail control to add sparkle and crispness to your tracks and make adjustments to the LF Detail control to add fullness and depth to vocals and bass instruments while cleaning up the muddy low midrange frequencies. And, the separate threshold and ratio controls on the Expander/Gate allow you to subtly reduce headphone leakage or radically gate noisy guitar amps. The dbx 286s offers a full compliment of metering and status LEDs to visually guide you to achieving the right sound. The floating balanced XLR Mic Input accepts balanced or unbalanced inputs to easily connect to professional and home studio microphones. The additional 1/4" TRS Line Input can accept balanced/unbalanced signals to process live electronic instruments or pre-recorded tracks at mixdown. Use the Insert jack to interface between the Mic Preamp and the signal processing sections to "loop out" to external processors (such as EQ or delay unit) or to mix the Mic Preamp's signal out to an external destination. The cost and hassle of patching together multiple processors for use on one track can be frustrating. The dbx 286s provides you with all the mic processing you need in one box, with the shortest, cleanest signal path to keep your music sounding its best!
MPN (manufacturer part number) | 286s |
---|---|
UPC (Universal Product Code) | 00691991401237 |
Condition | New |
Specs | MIC INPUT INPUT Floating balanced, Pin 2 HotImpedance: ~4.2kΩMaximum Level: 0.25Vrms, Gain = 30dBGain Adjustment Range: 0dB to +60dBPhantom Power: +48VDC, applied to XLR pins 2 and 3 through 6.81kΩ resistorsCMRR: >40dB, typically 55dBEIN: -125dBu, 22Hz-22kHz, 150Ω source impedance LINE INPUT Input: Floating balanced, TIP HotImpedance: 10kΩ unbalanced, 20kΩ balancedMaximum Level: >+21dBu, balanced or unbalancedGain Adjustment Range: -15dB to +45 dBCMRR: >40dB, typically 55dBINSERT (1/4" TRS phone) Normalled; tip is Send, ring is ReturnRing: Impedance: >5kΩMaximum Level: >+21dBuTip: Impedance: 100ΩMaximum Level: >+21dBu, >+20dBm (600Ω load)Noise: <-89dBu, unweighted (20Hz-20kHz); LINE GAIN Control set to 0dBDistortion: <0.01% THD, 20Hz-20kHz, +10dBuLINE OUTPUT 1/4" TRS phone: Balanced/UnbalancedImpedance: 100Ω unbalanced, 200Ω balancedMaximum Level: >+21dBu, >+20dBm (600Ω load)Gain Adjustment Range: -30dB to +10dBNoise: <-80dBu unweighted (20Hz-20kHz); Both Gain Controls set for 0dB, all processing controls OFFFrequency Response: 20Hz to 20kHz, +0.5/-0.5dBDistortion: <0.08%THD, 20Hz-20kHz, +10dBu, all Processing Controls OFFCOMPRESSOR Threshold Range: -40dBu to +20dBuThreshold Characteristics: OverEasy®Compression Ratio: >4:1 For input levels beyond 20dB above thresholdMaximum Compression: 30dBAttack Time: Program-Dependent; >1s for small level increases, down to 10ms for larage increasesRelease Time: Program-Dependen; adjustable between approximately 1dB/sec and 75dB/secDistortion: Typically <0.05%THD, 20Hz-20kHz, 15dB G/R, +10dBu Output, DENSITY @ 0SMPTE Intermodulation Distortion: <0.05%; 60Hz/7kHz 4:1, 15dB G/R, +10dBu Output Level, DENSITY @ 0DE-ESSER Characteristic: Wideband Gain ReductionFrequency Range: 800Hz to 10kHz High Pass, 12dB/octaveRelease Time: Program-Dependent approximately 1ms/dBENHANCER HF Detail Characteristic: Program-controlled shelving equalizer, approximately 15dB maximum HF boostLF Detail Characteristics: Bell-shaped boost @ 80Hz, bell-shaped cut @250Hz, ratio is approximately 2:1EXPANDER/GATE Threshold Range: OFF to +15dBuExpansion Ratio: Adjustable 1.5:1 to 10:1Maximum Depth: >50dBAttack Time: Program-Dependent, approximately 2mS (at maximum attenuation)Release Time: Program-Dependent, approxiamtely 10mS/dBDynamic Range: Typically 105dBPOWER Power Requirements: 15wattsOperating Voltage: DO: 120VAC 60Hz, 100VAC 50/60Hz; EU: 230VAC 50/60HzOperating Temperature: 0°C to 45°C (32°F to 113°F)PHYSICAL Dimensions: 1.75" x 5.75" x 19" (4.5cm x 14.6cm x 48.5cm)Weight: Net Weight: 4.5 lbs/2.04 Kgs Shipping Weight: 6.54 lbs/2.97 Kgs |