Shure BETA 27 Supercardioid Condenser Microphone

Special Price $399.00 Regular Price $499.00


-Side-Address Condenser Mic -Supercardioid Polar Pattern -3-Position Low-Frequency Filter -15dB Pad Switch -Flat Natural Frequency Response
Shure BETA 27 Supercardioid Condenser Microphone Supercardioid side-address condenser microphone for instrument and vocal applications The Beta 27 side-address condenser microphone is precision engineered for professional sound reinforcement and project studio recording applications. Its flat frequency response and low self-noise provide unerring performance in demanding environments. A tight supercardioid pattern ensures high gain-before-feedback and maximum isolation from other sound sources.
More Information
Freeshipping Free Shipping
UPC (Universal Product Code) 042406180375
MPN (manufacturer part number) BETA 27
Condition New
Features -Supercardioid polar pattern specifically targets the sound source consistently with greatly minimized bleed from off-axis sound sources -Tailored for superior transient response from a low-mass, 1” externally-biased, ultra-thin 24 Karat gold-layered M
Specs Type Condenser (externally biased) Frequency Response 20 to 20,000 Hz Polar Pattern Supercardioid Impedance 160 Ohms Sensitivity (at 1 kHz, open circuit voltage) -37 dBV/Pa Common Mode Rejection (20 Hz to 20 kHz) > 50 dB Clipping Level (20Hz-20 kHz at 1% THD) 1000 Ohm load: 2.0 dBV 2500 Ohm load: 8.5 dBV THD of microphone preamplifier when applied input signal is equivalent to cartridge output at specified SPL Self Noise (typical, equivalent SPL, A-weighted) 8.5 dB Polarity Positive pressure on diaphragm produces positive voltage Maximum SPL (1 kHz at 1% THD) 1000 Ohm load: 134 dB (148 dB, Pad on) 2500 Ohm load: 140 dB (154 dB, Pad on) Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz) 85.5 dB S/N ratio is difference between 94 dB SPL and equivalent SPL of self noise, A-weighted Dynamic Range (at 1 kHz) 1000 Ohm load: 125.5 dB 2500 Ohm load: 131.5 dB Weight Net: 428 g (15.1 oz.) Switch Attenuator: -15 dB Low Frequency Response: flat; -6 dB/octave below 115 Hz; -18 dB/octave below 80 Hz Connector Three-pin professional audio (XLR), male Power Requirements 48 Vdc phantom, 5.6 mA
Producut Video No
© 2008 - 2020 RK Audio • 188 Lauman Lane Hicksville NY 11801 • 516-597-5450 All Rights Reserved.