Shure BLX14/PG85 - Lavalier Wireless System With PG185 Lavalier

Special Price $299.00 Regular Price $374.00

 
not_available
   

SKU
SHURE-BLX14/PG85
System Includes -BLX1 Bodypack Transmitter -BLX4 Single Channel Receiver -PG185 Lavalier Microphone

Shure BLX14/PG85 - Lavalier Wireless System With PG185 Lavalier 

Shure BLX Wireless Systems combine professional-quality sound with simple setup and an intuitive interface for legendary audio performance right out of the box. Precision-built and available in a variety of configurations, it’s the most accessible way to own the stage.

Includes PG185 lavalier microphone, BLX1 bodypack transmitter, BLX4 single-channel receiver, power supply, 2 AA batteries, and user guide.

More Information
SKU SHURE-BLX14/PG85
Freeshipping Free Shipping
UPC (Universal Product Code) No
MPN (manufacturer part number) BLX14/PG85
Discount No
Condition New
Features BLX1 -Quick and easy receiver frequency matching -TQG connection for use with Shure lavalier, headset, earset and instrument microphones and guitar cables -Easily accessible On / Off switch BLX4 -XLR and ¼" output connectors -Two-color audio status indicator LED -Green: Normal audio levels -Red: Excessive audio levels (overload / clipping) PG185 -Cardioid polar pattern -Wide frequency response -TA4-Female connection
Specs

BLX1

Audio Input Gain: -16 dBV (Maximum), 10 dBV (Minimum
Gain Adjustment Range 26 dB
Input Impedance 1 MΩ
RF Output 10 mW, Typical
Housing Molded ABS
Power Requirement 2x LR6 AA Batteries, 1.5 V Alkaline
Battery Life Up to 14 Hours
Dimensions (H x W x D) 4.3 x 2.5 x 0.8" (110 x 64 x 21 mm)
Weight 2.6 oz (75 g)

 

BLX4

Output 1x XLR Output 
1x 1/4" (6.35 mm) Output
Output Impedance XLR: 200 Ω 
1/4": 50 Ω
Audio Output Level XLR Connector: -27 dBV into 100kΩ Load (Reference +/-33 kHz with 1 kHz Tone) 
1/4": -13 dBV into 100kΩ Load (Reference +/-33 kHz with 1 kHz Tone)
RF Sensitivity -105 dBm for 12 dB SINAD, Typical
Image Rejection >50 dB, Typical
Housing Molded ABS
Power Requirement 12 to 15 V DC @ 160 mA, Supplied by External Power Supply (Tip Positive)
Dimensions (H x W x D) 1.5 x 7.4 x 4.1" (40 x 188 x 103 mm)
Weight 8.5 oz (241 g)

 

PG185

Transducer Condenser, Electret Bias
Polar Pattern Cardioid (Unidirectional)
Frequency Response 60Hz to 12kHz
Dynamic Range (Typical) 92dB
Signal-to-Noise Ratio 66dB, 1kHz @ 1 Pa
Maximum Input Sound Level 120dB
Power Requirements +5VDC, 10V max (pin 2 to pin 1)
Output Impedance 1200 ohms @ 1kHz
Output Connectors TA4-Female
Pad No
Low Frequency Roll-Off No
Cable Length 48" (1.22m)
Weight 0.81 oz (23 g)
Producut Video No

© 2008 - 2018 RK Audio • 188 Lauman Lane Hicksville NY 11801 • 516-597-5450 All Rights Reserved.