Shure KSM44/SL Large Diaphragm Condensers Studio Microphone

Special Price $799.00 Regular Price $1,249.00

 
not_available
   

SKU
SHURE-KSM44/SL

Replacement cartridge: RPM130 Extended frequency response Very low self-noise Exceptional low-frequency reproduction High output level High input SPL capability No cross-over distortion Extremely uniform polar response Superior common mode rejection and suppression of radio frequency interference
Shure KSM44/SL - Large Diaphragm Condensers Studio Microphone The KSM44/SL is a multiple pattern (cardioid, omnidirectional, bidirectional), externally biased, dual large diaphragm condenser microphone with extremely low self-noise (7dB). Developed to meet the needs of studio recording musicians, the warm, rich sound of the KSM44 delivers exceptional performance, tailored to deliver vivid reproduction of voice for the most critical recordings. The KSM44 also offers great flexibility in a variety of recording applications, working well on acoustic and amplified instruments, as its capacity for managing high SPLs accommodates loud sound sources such as drums and guitar amplifiers.
More Information
SKU SHURE-KSM44/SL
Freeshipping Free Shipping
UPC (Universal Product Code) No
MPN (manufacturer part number) KSM44SL
Discount No
Condition New
Features • Cartridge Type Externally biased condenser • Frequency Response 20 to 20,000 Hz • Output Impedance 150 ohms (actual) • Attenuation Switch 0 or 15 dB attenuation • Low Frequency Response Switch Flat; -6 dB/octave below 115 Hz;-18 dB/octave below 80 Hz • Phantom Power 48 Vdc (IEC-268-15/DIN 45 596), positive pins 2 and 3 • Current Drain 5.4 mA typical at 48 Vdc • Common Mode Rejection > 50 dB, 20 Hz to 20 kHz • Polarity Positive pressure on front diaphragm produces • positive voltage on output pin 2 relative to pin 3 • Directional Polar Patterns Cardioid Omnidirectional Bidirectional • Sensitivity(typical; at 1000 Hz; 1 Pa = 94 dB SPL) -31 dBV/Pa -37 dBV/Pa -36 dBV/Pa • Self-noise(typical, equivalent SPL; A-weighted, IEC 651) 7 dB 10 dB 10 dB • Maximum SPL @ 1000 Hz 2500 ohm load (Attenuator on) 132 (149) dB 138 (151) dB 137 (150) dB 1000 ohm load (Attenuator on) 127 (144) dB 132 (145) dB 131 (144) dB • Output Clipping Level* 2500 ohm load 7 dBV 7 dBV 7 dBV1000 ohm load 1 dBV 1 dBV 1 dBV • Dynamic Range 2500 .ohm load 125 dB 128 dB 127 dB1000 ohm load 120 dB 122 dB 121 dB • Signal to Noise ratio** 87 dB 84 dB 84 dB • Dimensions and Weight 55.9 mm (2.20 in.) maximum body diameter, 187 mm(7.37 in.) long; 490.5 grams (17.30 oz).
Specs • Cartridge Type Externally biased condenser • Frequency Response 20 to 20,000 Hz • Output Impedance 150 ohms (actual) • Attenuation Switch 0 or 15 dB attenuation • Low Frequency Response Switch Flat; -6 dB/octave below 115 Hz;-18 dB/octave below 80 Hz • Phantom Power 48 Vdc (IEC-268-15/DIN 45 596), positive pins 2 and 3 • Current Drain 5.4 mA typical at 48 Vdc • Common Mode Rejection > 50 dB, 20 Hz to 20 kHz • Polarity Positive pressure on front diaphragm produces • positive voltage on output pin 2 relative to pin 3 • Directional Polar Patterns Cardioid Omnidirectional Bidirectional • Sensitivity(typical; at 1000 Hz; 1 Pa = 94 dB SPL) -31 dBV/Pa -37 dBV/Pa -36 dBV/Pa • Self-noise(typical, equivalent SPL; A-weighted, IEC 651) 7 dB 10 dB 10 dB • Maximum SPL @ 1000 Hz 2500 ohm load (Attenuator on) 132 (149) dB 138 (151) dB 137 (150) dB 1000 ohm load (Attenuator on) 127 (144) dB 132 (145) dB 131 (144) dB • Output Clipping Level* 2500 ohm load 7 dBV 7 dBV 7 dBV1000 ohm load 1 dBV 1 dBV 1 dBV • Dynamic Range 2500 .ohm load 125 dB 128 dB 127 dB1000 ohm load 120 dB 122 dB 121 dB • Signal to Noise ratio** 87 dB 84 dB 84 dB • Dimensions and Weight 55.9 mm (2.20 in.) maximum body diameter, 187 mm(7.37 in.) long; 490.5 grams (17.30 oz).
Producut Video No

© 2008 - 2017 RK Audio • 188 Lauman Lane Hicksville NY 11801 • 516-597-5450 All Rights Reserved.