Special Price $699.00 Regular Price $990.08
SLX Wireless Instrument System. Includes WB98H/C Clip-On Cardioid Condenser Instrument Microphone, SLX1 Bodypack Transmitter and SLX4 Diversity Receiver. A versatile wireless solution for brass or percussion instruments.
Shure SLX14/Beta98H Instrument Wireless System Smart, Hard-Working Wireless. Sound installations and working bands need powerful wireless tools that can be set up quickly and used confidently. The rugged SLX® UHF Wireless Systems exceed these demands with innovative setup features such as auto frequency scan with transmitter setup, exceptional wireless clarity, and legendary Shure microphones. SLX Wireless Instrument System. Includes WB98H/C Clip-On Cardioid Condenser Instrument Microphone, SLX1 Bodypack Transmitter and SLX4 Diversity Receiver. A versatile wireless solution for brass or percussion instruments.
|UPC (Universal Product Code)||0 42406146081|
|MPN (manufacturer part number)||SLX14/BETA98H|
|Discount||INSTANT SAVINGS: 10% OFF|
|Is Product Available for Purchase with Google Checkout||Yes|
|Features||• The WB98H/C features transformerless preamplifier circuitry, which improves linearity across the full frequency range. • The pickup pattern of the Beta 98H/C provides high gain-before-feedback and excellent rejection of unwanted noise. • Its high maximum sound pressure level (SPL) enables it to handle the extreme demands of brass, woodwind and percussion instruments. • Backlit LCD with timeout feature • Frequency and power lockout • 3-segment battery fuel gauge • 2 AA batteries (included) provide 8 hours of continuous use • 470 - 782 MHz operating range • SLX Wireless Systems feature the patented Audio Reference Companding for crystal-clear sound beyond the limits of conventional wireless technology. • Automatic Frequency Selection • Automatic Transmitter Setup • 960 Selectable frequencies across 24 MHz bandwidth • Detachable 1/4 wave antennas • Microprocessor-controlled diversity • RF presence LED • 5-segment audio meter • Multi-function, backlit LCD • Low battery indicator • Frequency and power lockout • Rugged metal chassis • Volume control on rear of unit • 1/2 rack design • Furnished rack hardware • Non-slip bumpers for use out of rack • XLR and 1/4" outputs • Optional logic functionality for software echo cancellation and remote battery life monitoring (SLX4L only)|
|Specs||Type Condenser (electret bias) Frequency Response 20 to 20,000 Hz view larger (measured at 304.8 mm [1 ft] from a spherical sound source, free field conditions) Polar Pattern Supercardioid (as supplied), uniform with frequency, symmetrical about axis. Cartridge for cardioid polar pattern also available. Output Level (at 1,000 Hz) Open Circuit Voltage: -59 dBV/Pa* (1 mV) typical *1 Pa = 94 dB SPL Maximum SPL (20 Hz to 20 kHz, less than 1% THD) 2.5 kilohm load: 160 dB 1 kilohm load: 156 dB Preamplifier Output Clipping Level (20 Hz to 20 kHz, less than 1% THD) 2.5 kilohm load: + 6 dBV (2.0 V) 1 kilohm load: + 2 dBV (1.26 V) Dynamic Range (at 20 Hz to 20 kHz, less than 1% THD, 2.5 kilohm load) 125 dB (max SPL minus A-weighted noise) Output Noise 35 dB SPL, A-weighted Signal-to-Noise Ratio 59 dB re 94 dB SPL Output Impedance Rated at 150 ohms (actual) Recommended minimum load impedance: 1 kilohm Hum Pickup -7.5 dB equivalent SPL in 1 mOe field (60Hz) Polarity Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3 Phantom Power 48 Vdc +/- 4 Vdc(IEC-268-15/DIN 45 596), positive pins 2 and 3. Cable BETA 98/S: 7.6 m (25 ft) light-weight, two-conductor shielded, TA4F to TA3F mini connectors. BETA 98D/S: 4.6 m (15 ft) heavy-duty, two-conductor shielded, TA4F to TA3F mini connectors. Case Microphone: Matte black enamel brass case and stainless steel inner grille Preamplifier: Matte black enamel finished steel Dimensions Microphone: 11.7 mm X 35.6 mm (0.46 in. X 1.40 in.) Preamplifier: 20 mm X 99 mm (0.79 in. X 3.89 in.) Net Weight Microphone: 12 g (0.4 oz) less cable Preamplifier: 96 g (3.4 oz)|
|This Product Qualifies for Free Shipping||Yes|