Symetrix Room Combine 788 Multi Room Controller And DSP
Special Price $2,099.00 Regular Price $2,969.00
-Control of up to 8 Zones -8 Mic and Line Inputs -4 Line Inputs -Feedback Control -Compression & EQ -Matrix Mixing -Limiting and Delay
Symetrix Room Combine 788 Multi Room Controller And DSP Selectively combine or separate automixing, paging and background music in up to eight (8) rooms in hotels, banquet halls, schools, and conference venues. Hospitality and meeting centers demand easily operated, yet sophisticated audio systems. Complete signal processing, automixing and combining of eight (8) microphones and four (4) background music (BGM) sources into as many as eight (8) rooms, each with comprehensive loudspeaker management. Combinations of audio, page, and BGM routing, including non-adjacent spaces, are assigned in the setup software. For real time user control the Symetrix ARC-SWK wall panel (sold separately) is perfectly suited for audio source selection and volume control. Multiple ARC-SWK’s dynamically synchronize as spaces are combined and separated. Preset room combinations can be recalled from the 788’s front panel, the ARC-2i wall panel, or a third-party control systems. “Soft wall” sensors accommodated with eight (8) analog control inputs for a simple triggering of combinations. Software Wizards effortlessly guide connection, wall panel programming, and graphical layout of the rooms and their relationships.
|MPN (manufacturer part number)||788|
|Features||-Easy to configure complete room combining -Eight (8) Mic/Line Inputs with filters, EQ, and feedback elimination into Gain-sharing Automixing, assignable to any of the eight rooms or used as a common paging source. -Four (4) Line Inputs with filters, EQ|
|Specs||Performance Data INPUTS Number of Inputs: Twelve (12) total; Eight (8) switchable balanced mic or line, Four (4) balanced line level Connectors: Phoenix Nominal Input Level: +4 dBu line or -40 dBu mic level (software selectable) with 20 dB of headroom Input Gain: +20 dB, +40 dB or +50 dB, mic inputs; +0 dBu or +11.8 dBu, line inputs (both via internal jumpers) Maximum Input Level: +23 dBu Input Impedance: > 4 kΩ balanced, > 2 kΩ unbalanced CMRR: > 55 dB @ 1 kHz, unity gain Mic Pre-amp EIN: > -127 dBu, 22 Hz - 22 kHz, 100 Ω source impedance Phantom Power: +48 VDC OUTPUTS Number of Outputs: Eight (8) balanced line level Connectors: Phoenix Nominal Output Level: +4 dBu line level with 20 dB of headroom. For unbalanced analog output, float (do not connect) the minus output terminal. Unbalanced usage results in 6 dB lower output level. Maximum Output Level: +24 dBu Output Impedance: 200 Ω balanced, 100 Ω unbalanced SYSTEM Sample Rate: 48 kHz Frequency Response: 20 Hz - 20 kHz, +/- 0.5 dB Dynamic Range: > 110 dB (A-Weighted), input to output THD+Noise: -85 dB (un-weighted); 1 kHz @ +22 dBu with 0 dB gain Interchannel Crosstalk: > -90 dB @ 1 kHz, typical MECHANICAL DATA Space Required: 1U (WDH: 48.02 cm x 22.15 cm x 4.37 cm / 18.91 in x 8.72 in x 1.72 in), depth is specified from front panel to back of connectors. Allow at least 3 inches additional clearance for rear panel connections. Additional depth may be required depending upon your specific wiring and connections. Electrical: 100-240 VAC, 50/60 Hz, 25 Watts maximum. No line voltage switching required. Ventilation: Maximum recommended ambient operating temperature is 30 C / 86 F. Ensure that the left and right equipment sides are unobstructed (5.08 cm, 2 in minimum clearance). The ventilation should not be impeded by covering the ventilation openings with items such as newspapers, tablecloths, curtains, etc. Certifications: UL 60065, cUL 60065, IEC 60065, EN 55103-1, EN 55103-2, FCC Part 15, RoHS Weight: 8.15 lbs. (3.70 kg)|