TC Helicon VoiceTone Synth - HardTune And Vocoder Pedal
Special Price $299.00 Regular Price $395.00
HardTune effect with user-selectable key or instrument-sensing Vocoder carrier is driven by internal voice-controlled synth or instrument input such as guitar Transducer effects add megaphones, distortion and radio voices All effects simultaneous
TC Helicon VoiceTone Synth - HardTune And Vocoder Pedal HardTune™ & Vocoder-in-a-Pedal Finally, the effects you’ve heard on chart topping tracks from artists pushing the envelope of vocal sounds are available in a pedal. VoiceTone Synth brings together a collection of exotic and current sonic mayhem including jagged HardTune effects, a MassiveBand Vocoder with voice-controlled synth and vocal distortion and megaphone effects. Now vocalists and anyone looking to add a modern edge to their live performances and studio productions can dial-in these effects instantly with the press of a footswitch.
|MPN (manufacturer part number)||VOICETUNESYNTH|
|Features||New Features in version 1.1 Chromatic mode allows complete vocal freedom with HardTune and voice-to-synth vocoder Natural pitch correction styles available with HardTune block Improved instrument vocoder presets for use by guitarist singers Significantly lower lead voice latency Improved megaphone styles MIDI improvements over USB including patch change and channel select for those integrating Synth into their computer-centric electronic music setup. User interface fixes and improvements HardTune effect with user-selectable key or instrument-sensing Vocoder carrier is driven by internal voice-controlled synth or instrument input such as guitar Transducer effects add megaphones, distortion and radio voices All effects simultaneous Tone feature smooths overall vocal sound with adaptive live engineer processing Presets can be edited and stored Instrument Thru allows normal instrument amplification USB for connection to VoiceSupport application for updates, new sounds, tips & tricks|
|Specs||Control 10 presets 6 styles for each effect block Lead Mix, Rez and Modify controls for effects Mic input level Inputs Mic Connector: Balanced XLR, input impedance 1kOhm Mic Input Sensitivity @ 0dBFS: -44dBu to +2dBu Mic Input Sensitivity @ 12dB: headroom -56dBu to -10dBu Instrument Input Connector: Unbalanced 1/4″, input imp. 1MOhm Instrument In Sensitivity: +15dBu @ 0dBFS EIN: -126dBu @ max mic amp gain, Rg = 150 Ohm Power Input: 12 VDC 300 mA, tip negative Outputs Main Output Connectors: Balanced XLR Output Impedance: 40 Ohm Output Level: +2 dBu @ 0dBFS Instrument Thru Connector: Unbalanced 1/4″ phone jack Instrument Thru output impedance: 270 Ohm Dynamic Range, Mic. @ Min gain >108dB: 20 Hz – 20kHz *A-weighted Dynamic Range, Mic. @ -18dBu sensitivity > 104dB: 20hz – 20kHz* THD+ Noise, Mic. @ Min gain: <-90dB Frequency Response, max gain -1.5dB @ 40 Hz, +0/-0.3 dB: (200Hz to 20 kHz) Instrument In to Thru Dynamic Range: >119dB Tuning Mute Attenuation: >100dB Conversion Characteristics Sample Rate :48 kHz Converter: AKM AK4620B AD / DA Conversion: 24 bit, 128x oversampling bitstream Power External Power Supply Mains Voltage: 100 to 240 VAC, 50 to 60 Hz (auto-select) Power Consumption: <5 W Safety EMC – Complies with EN 55103-1 and EN 55103-2 FCC part 15, Class B, CISPR 22, Class B Safety – Certified to: IEC 65, EN 60065, UL6500 and CSA E60065 CSA FILE #LR108093 Operating Requirements Operating Temperature: 32° F to 122° F (0° C to 50° C) Storage Temperature: -22° F to 167° F (-30° C to 70° C) Humidity: Max. 90 % non-condensing Size Height: 5.25 inches (132 mm) Width: 5 inches (130 mm) Depth: 1.5 inches (41 mm) Weight Weight: 1.5 lb. (0.72 kg) Construction Die cast steel and anodized extruded aluminum Ultra bright LEDs|