High-gain mic preamps with very low noise and distortion 48 Volt phantom power for use with any condenser microphones Auxilliary Tape/CD Inputs and Outputs Pan Control on Each Channel Five Year Warranty
Ashly MX-206 6-Input Stereo Microphone Mixer Designed to be used by itself or as a supplement to larger mixing consoles, the MX-206 from Ashly provides superior audio performance in a single rack-space package. Equally at home in either fixed or portable installations, the MX-206 may be used anywhere where additional microphone inputs are needed. Typical applications include live sound reinforcement, broadcast, recording, and film/video production. The Ashly MX-206 is a rack-mountable six input channel stereo microphone mixer offering up to 84 dB of gain for distant mic placements or extremely low-level signals. Ultra low-noise, studio-grade integrated mic preamps are utilized. Each channel has a switchable 20 dB pad, a three-position sensitivity switch to handle microphones with different input sensitivities, and 48 V phantom power may be switched in for use by condenser mics. Every input has its own peak LED indicator. A separate Aux In volume control adjusts line level sources, such as a CD player or tape deck connected to rear-panel RCA inputs. Since plenty of headroom has been designed into the MX-206, even the loudest signals can be handled without distortion. Output is monitored via two 5-segment, multi-colored LED meters, along with separate Peak Clip Indicators. The transformer-isolated XLR balanced mono output is capable of driving +24dBu into 600 ohms, and a separate TRS 1/4" output may be used either balanced or unbalanced. An Aux output appears on RCA jacks. The MX-206 provides superior audio performance in a rugged and durable package. Backed by Ashly's exclusive Five Year Worry-Free Warranty, the MX-206 is designed to provide many years of trouble-free operation.
|UPC (Universal Product Code)||0 844635000000|
|MPN (manufacturer part number)||MX206|
|Features||Universal switching power supply; operates from 100 - 240VAC, 50/60Hz. Outputs are now servo-balanced. Power switch moved to the rear panel. Panel color has changed from gray to charcoal. Inside rack depth is eight inches. Power LED is blue. High-gain mic preamps with very low noise and distortion 48 Volt phantom power for use with any condenser microphones Auxilliary Tape/CD Inputs and Outputs Pan Control on Each Channel Five Year Warranty|
|Specs||THD at +20 dBu, 20Hz-20KHz, input switch at -40dB <0.05% IMD (SMPTE) at +20dBu, input switch at -40dB <0.02% HUM & NOISE (20Hz-20KHz , input switch at -60dB) Equivalent input hum and noise <-127dBu Residual output noise, TRS outputs, all levels at minimum <-100dBu Residual output noise, XLR outputs <-90dBu Master Level at nominal, all Ch. Level controls at min <-84dBu Master Level and one Ch. Level at nom <-80dBuIMUM VOLTAGE GAIN (±2dB) Mic Input to Master Output, 600 ohm load <-84dB Aux In to Master Output <-34dB Frequency Response - 20Hz-20Khz +0/-0.5dB Crosstalk - between any inputs or outputs 20Hz-20KHz <-60dB INDICATORS VU METERS - Two 6-segment LED meters 0VU = +4dBu PEAK INDICATORS Peak Clip indicator on each input channel and left and right outputs, illuminates 3dB below clipping PHANTOM POWER +48 VDC applied to all Mic Inputs, switchable on front panel. Maximum total current draw = 80mA. Maximum single channel current draw = 14mA. Gradual power-up and down to eliminate"pops". SHIPPING WEIGHT 13 lbs. Maximum POWER REQUIREMENTS 100-240 Volts, 50-60 Hz, 30 watts DIMENSIONS: 19" wide x 1.75" high x 8.0" deep.|