All-Weather Compact 2-Way Coaxial Loudspeaker with 6.5" LF
The JBL AWC 62 is a small, coaxial-driver, 2-way, Loudspeaker, profoundly climate safe full-run amplifier framework which is perfect for discourse and music-fill in a wide assortment of utilizations, including sports arena, offices, courses, stadiums, carnival, rodeos, skating arenas, themed diversion scenes, voyage ships, water parks, open air ambient sounds/paging frameworks, swimming pools, and a wide assortment of other outside or indoor setting sorts.
- Highly weather-resistant IP56 rating.
- Consistent 110° x 110° broadband pattern control.
• 165 mm (6.5 in) woofer with Kevlar-reinforced cone and 38 mm (1.5 in) voice coil.
• 25 mm (1 in) exit compression driver
- Extraordinary clarity for speech, with extended frequency response for music.
- Advanced high-slope crossover network for constant coverage and smooth, natural midrange.
- 175 Watt power handling (average continuous pink noise) with high sensitivity provides high SPL capability.
- High-power passive crossover network.
- Overload protection.
- 70 Hz – 18 kHz frequency response.
- 120 Watt 70V/100V multi-tap (built-in transformer) or direct 8Ω low-impedance.
|Frequency Range (-10 dB)||70 Hz – 18 kHz|
|Frequency Response (±3 dB)||100 Hz – 16 kHz|
|Coverage Pattern||110º x 110º|
|Directivity Factor||7.2 (1 k – 16 kHz)|
|Directivity Index (DI)||7.9 dB (1 k – 16 kHz)|
|Long-Term System Power Rating (IEC)||175 W 2 hrs.
120 W 100 hrs
|Sensitivity (2.83V @ 1m)||92 dB (Ave. 100 Hz – 18 kHz)|
|Maximum SPL||Direct 8Ω: 114 dB (peaks of 120 dB)
120 W Tap: 112 dB
|Crossover Network||1.8 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 3rd order low-pass to LF|
|Nominal Impedance||8 ohms|
|Transformer Taps||70V: 120W, 60W, 30W, 15W
100V: 120W, 60W, 30W
|Low Frequency Driver||Kevlar-reinforced cone with weather treatment, 38 mm (1.5 in) voice coil.|
|High Frequency Driver||25 mm (1 in) diaphragm and voice coil diameter|
|HF Driver Protection||Minimum audibility SonicGuard™ HF overload protection|
|Enclosure||ABS with Glass enclosure|
|Attachment||Two M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel.|
|Grille||Corrosion-resistant zinc-rich extra-thick powder coated steel grille, 3-layer assembly with foam and woven poly mesh backing.|
|Input Connection||CE-compliant covered barrier strip terminals. Barrier terminals accept up to 8 mm outside 4 mm inside open-lug (#6 or #8) plus bare wire up to 2.5 mm2 (12 AWG) wire or spade lugs. Terminal compartment cover equipped with gland nut that forms water-tight seal with round- jacketed cables with outside diameters between 4.0 mm (0.16”) and 9.0 mm (0.36”).|
|Environmental||IP56 per IEC529, with a minimum 5° downward aiming angle. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV, and ASTM G85 for salt spray (168 hrs).|
|Dimensions||259 x 259 x 255 mm (10.2 x 10.2 x 10.1 in), cabinet
288 mm (11.4 in) including gland nut
309 mm (12.2 in) including bracket extending to back
|Colors||Available in gray (similar to Pantone 420C) and black (-BK)|
|Net Weight||6.8 kg (15.0 lb), 7.7 kg (17.0 lb) with U-bracket|
|Shipping Weight||8.8 kg (19.5 lb)|
|Included Accessories||U-bracket, matches loudspeaker color (gray or black), zinc-rich extra thick powder coated, steel.|
|UPC (Universal Product Code)||691991006029|
|MPN (manufacturer part number)||AWC62|
|Discount||INSTANT SAVINGS: 10% OFF|